My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
04-9-14-PC
ArdenHills
>
Administration
>
Commissions, Committees, and Boards
>
Planning Commission
>
Planning Commission Packets
>
2010-2019
>
PC Packets 2014
>
04-9-14-PC
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
11/9/2015 3:33:33 PM
Creation date
9/22/2014 3:29:08 PM
Metadata
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
79
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
Ryan B. Streff <br />City Planner <br />City of Arden Hills <br />1245 West Highway 96 <br />Arden Hills, MN 55112-5743 <br /> <br />March 6, 2014 <br /> <br />Ryan, <br /> <br />Hood Packaging Corporation is currently in the process of installing an additional Flexographic printing <br />press at our Arden Hills, MN location. With this new machine we will need to install an additional <br />double walled storage tank. This tank will store ink and solvent waste produced in the flexographic <br />printing process and is needed to house excess waste from the new machine. <br /> <br />We are requesting a Planned Unit Development Amendment so that we may install the tank in the back <br />of our building. We currently have 4 similar tanks installed on the property, two 3,000 gallon tanks <br />housing new clean solvent, one 2,500 gallon tank housing recycled solvent, and one 2,500 gallon tank <br />housing ink and solvent waste. The additional tank will be installed within the existing concrete slab and <br />containment curbing which can hold 100 percent of the contents of the largest tank plus 10%. The tank <br />will be plumbed into our existing closed loop system using double walled piping. The tank is to be <br />placed within the existing 7 foot tall tan colored fence. The proposed tank and containment are in <br />compliance with MPCA regulations regarding above ground storage tanks and will be registered with the <br />MPCA before being put into use. The tank will be placed horizontally behind the existing tanks <br />approximately 7 feet from the outside wall of the building. The tank capacity is 2,500 gallons and is 64’’ <br />tall by 15’ long by 40’’. The tank is 100% steel and is to be painted white. Hood Packaging Corporation <br />is licensed by Ramsey County as a large quantity hazardous waste generator. ID # MNR000102509. <br /> <br />Please contact me if you have any questions I can be reached at 651/636-2500 x 291 or <br />thegstrom@hoodpkg.com <br /> <br />Regards, <br /> <br /> <br /> <br /> <br /> <br />Ted Hegstrom <br />Process Improvement Manager <br />Hood Packaging Corporation <br />1887 Gateway Blvd <br />Arden Hills, MN 55112 <br /> <br /> <br />
The URL can be used to link to this page
Your browser does not support the video tag.