11-5-14-WS - Laserfiche WebLink

Home Browse Search

DRAFT October 15, 2014 TCAAP Redevelopment Code Page | 103 11.4 Highway Monument Sign Location Standards (a) IH-35W, Hwy 10 and MN-96 Frontages only a. Located within 60 ft. of the edge of IH-35W, Hwy 10 or MN-96. b. Maximum height of 30 ft. above the street pavement grade of the elevated portion of the highway. c. Maximum total sign face area of 400 sq. ft (cumulative of all surfaces). Sign face may be divided into multiple segments. Area between segments does not count toward sign face area. d. One sign allowed for lots with at least 1,000 ft. of highway frontage. Two signs permitted for frontages greater than 1,000 ft. Signs to be a minimum of 1,000 ft. apart. 11.5 Corridor Monument Sign Location Standards (a) All per zoning district permitted i. Maximum area of 0.7 sq. ft. for each linear foot of street frontage with a maximum of 150 sq. ft. for multi-tenant signs. ii. One per lot. For lots with a total street frontage greater than 500 ft., two (2) signs are permitted. Signs must be a minimum of 400 ft. apart. iii. For lots fronting two streets, one sign is permitted on each street. iv. Maximum height of 12 ft. above frontage street pavement grade. v. Monument structure shall include a base, frame, and cap around the sign area. Material shall be the same as the principal structure on the lot. 11.6 Building Identity Sign Location Standards (a) IH-35W, Hwy 10 and MN-96 Frontages only i. May be used for single tenant commercial or institutional buildings only (multiple tenant building shall be subject to 12.6 below). ii. May be used instead of a Building Projecting Sign or a Roof Sign iii. Maximum area of 200 sq. ft. or 15% of length of façade, whichever is less. iv. Mount no lower than 25 ft. above finished grade. v. No more than 25% of façade area above 25 ft. can contain Building Identity signs. (b) All frontages other than IH-35W, Hwy 10 and MN-96 i. May be used for single tenant commercial or institutional buildings only (multiple tenant building shall be subject to 12.6 below). ii. May be used instead of a Building Projecting Sign iii. Maximum area of 150 sq. ft. or 12% of length of façade, whichever is less. iv. Mount no lower than 25 ft. above finished grade. v. No more than 15% of façade area above 25 ft. can contain Building Identity signs.