12-3-14-WS - Laserfiche WebLink

Home Browse Search

DRAFT November 25, 2014 TCAAP Redevelopment Code Page | 101 11.7 Storefront/Tenant Wall Sign Location Standards (a) IH-35W, Hwy 10 and MN-96 Frontages only i. May be used for multiple tenant commercial, office or institutional buildings only (single tenant building shall be subject to 11.6 above). ii. May be used instead of a Tenant Canopy Sign iii. May be located on the ground floor façade only (sign to be mounted below 25 feet as measured from finished grade outside the facade). iv. One sign per tenant space; area to be calculated at 2 sq.ft. per linear foot of tenant space façade along the building’s frontage up to a maximum of 150 sq.ft. v. Sign to be located between demising walls of leased storefront. vi. Sign shall not overlap architectural features like window lintels, canopy support points, coping, etc. vii. Wall sign may encroach, a maximum of 12”, on to a sidewalk while maintaining a vertical clearance of 8 ft. from the finished sidewalk if it is non-illuminated and 11 ft. from the finished sidewalk if it is illuminated. viii. Building signs may be internally or externally lit. (b) All frontages other than IH-35W, Hwy 10 and MN-96 i. May be used for multiple tenant commercial, office or institutional buildings only (single tenant building shall be subject to 11.6 above). ii. May be used instead of a Tenant Canopy Sign iii. May be located on the ground floor façade only (sign to be mounted below 25 feet as measured from finished grade outside the facade). iv. One sign per tenant space; area to be calculated at 1.5 sq.ft. per linear foot of tenant space façade along the building’s frontage up to a maximum of 100 sq.ft. v. Sign to be located between demising walls of leased storefront. ix. Sign shall not overlap architectural features like window lintels, canopy support points, coping, etc. vi. Wall sign may encroach, a maximum of 12”, on to a sidewalk while maintaining a vertical clearance of 8 ft. from the finished sidewalk if it is non-illuminated and 11 ft. from the finished sidewalk if it is illuminated. vii. Building signs may be internally or externally lit. viii. Live-Work and Home occupations: One sign limited to an area of 30 sq. ft. max. 11.8 Building Projecting Signs Location Standards (a) All per zoning district permitted i. Building Projecting sign may be permitted in place of a Building Identity Sign. ii. Maximum area of 200 sq. ft. or 15% of the façade area, whichever is less iii. Will not obstruct any pedestrian or vehicular way (vertical clearance of 10 ft. from the finished sidewalk if it is non-