My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
04-13-15-WS
ArdenHills
>
Administration
>
City Council
>
City Council Packets
>
2010-2019
>
2015
>
04-13-15-WS
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
5/5/2015 11:40:00 AM
Creation date
4/13/2015 2:01:46 PM
Metadata
Jump to thumbnail
< previous set
next set >
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
215
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
DRAFT April 7, 2015 <br />Section 11: Sign Standards TCAAP Redevelopment Code <br />Page | 103 <br /> <br />11.4 Highway Monument Sign <br /> Location Standards <br />(a) I-35W and Hwy 10 <br />Frontages only <br />a.Located within 60 ft. of the edge of I-35W or Hwy 10. <br />b. Maximum height of 30 ft. above the street pavement grade of <br />the elevated portion of the highway. <br />c. Maximum total sign face area of 400 sq. ft (cumulative of all <br />surfaces). Sign face may be divided into multiple segments. <br />Area between segments does not count toward sign face area. <br />d. One sign allowed for lots with at least 1,000 ft. of highway <br />frontage. Two signs permitted for frontages greater than 1,000 <br />ft. Signs to be a minimum of 1,000 ft. apart. <br /> <br />11.5 Corridor Monument Sign <br /> Location Standards <br />(a) All per zoning <br />district permitted <br />i. Maximum area of 0.7 sq. ft. for each linear foot of street <br />frontage with a maximum of 150 sq. ft. for multi-tenant signs. <br />ii. Corridor Monument Sign not permitted for single-tenant <br />buildings, instead multiple single tenants should be combined <br />onto one (1) Corridor Monument Sign. <br />iii. One per lot. For lots with a total street frontage greater than <br />500 ft., two (2) signs are permitted. Signs must be a minimum of <br />400 ft. apart. <br />iv. For lots fronting two streets, one sign is permitted on each street. <br />v. Maximum height of 12 ft. above frontage street pavement <br />grade. <br />vi. Monument structure shall include a base, frame, and cap around <br />the sign area. Material shall be the same as the principal <br />structure on the lot. <br />vii. Maximum total area shall not exceed 1.5 times the permitted <br />sign copy area of a sign. <br /> <br />11.6 Building Identity Sign <br /> Location Standards <br />(a) I-35W, Hwy 10 and <br />MN-96 Frontages only <br />i. May be used for single tenant commercial, office or institutional <br />buildings only (multiple tenant building shall be subject to 11.7 <br />below). <br />ii. May be used instead of a Building Projecting Sign <br />iii. Maximum area of 200 sq. ft. or 15% of the façade area, <br />whichever is less. <br />iv. Mount in upper third of the facade. <br />(b) <br /> <br /> <br />All frontages other than <br />I-35W, Hwy 10 and <br />MN-96 <br /> <br /> <br /> <br />i. May be used for single tenant commercial, office or institutional <br />buildings only (multiple tenant building shall be subject to 11.7 <br />below). <br />ii. May be used instead of a Building Projecting Sign <br />iii. Maximum area of 150 sq. ft. or 10% of the façade area, <br />whichever is less. <br />iv. Mount in the upper third of the facade
The URL can be used to link to this page
Your browser does not support the video tag.