Laserfiche WebLink
July 13, 2015 <br /> <br />Section 6: Building and Site Development Standards TCAAP Redevelopment Code <br />Page | 38 <br /> <br /> <br />Graphic Illustrating the <br />Application of Street Type <br />Designation Based on the <br />Development Context <br />(b) Treatment of Street Intersections: <br />i. Corner building street facades along intersections of Pedestrian Priority Frontages and <br />Pedestrian-Friendly Frontages shall be built to the BTZ for a minimum of 20’ from the <br />intersection along each street or the width of the corner lot, whichever is less regardless <br />of the building frontage percentage required along that street. This requirement shall <br />not prohibit incorporation of curved, chamfered building corners or recessed entries or <br />civic/open spaces at such intersections. In addition, this standard shall apply regardless <br />of the frontage requirement along the intersecting street even if it is a General Street. <br /> Illustration showing minimum frontage requirements at street intersections <br /> <br />ii. Corner Building Height Allowance: Corner buildings may exceed the maximum building <br />height by 25% along no more than 20% of the building’s frontage along each <br />corresponding street façade. The purpose of the allowance is to encourage inclusion of <br />architectural features and no mechanical equipment shall be located on top of a roof <br />area that takes advantage of this allowance. Corner Building Height Allowances are <br />not permitted in the Neighborhood Zone.