Laserfiche WebLink
Approved July 13, 2015 <br />Revised December 12, 2016 <br /> <br />Section 11: Sign Standards TCAAP Redevelopment Code <br />Page | 105 <br />  <br />11.8 Building Projecting Signs <br /> Location Standards <br />(a) <br /> <br /> <br />All per zoning <br />district permitted <br /> <br /> <br />i. Building Projecting sign may be permitted in place of a Building <br />Identity Sign. <br />ii. Maximum area of 200 sq. ft. or 15% of the façade area, <br />whichever is less <br />iii. Will not obstruct any pedestrian or vehicular way (vertical <br />clearance of 10 ft. from the finished sidewalk if it is non- <br />illuminated and 11 ft. from the finished sidewalk if it is <br />illuminated). <br />iv. Sign may project no more than 50% of the width of the sidewalk <br />or six (6) ft. from building façade line (whichever is less). <br />v. Sign may not extend above building parapet line or eaves line. <br />vi. Maximum of one per façade <br />vii. Signs must be constructed of durable materials. Impermanent <br />materials, such as canvas or flexible vinyl, are not allowed. <br /> <br />11.9 Tenant Canopy Sign <br /> Location Standards <br />(a) <br /> <br /> <br />All per zoning <br />district permitted <br /> <br /> <br /> <br />i. May only be used instead of a Storefront/Tenant Wall Sign. <br />ii. One sign per tenant space; area to be calculated at 1.5 sq.ft. <br />per linear foot of tenant space façade along the building’s <br />frontage up to a maximum of 100 sq.ft. <br />iii. Sign to be located between demising walls of leased storefront. <br />iv. Sign shall not extend beyond outermost edges of canopy. <br />v. Signs are to be mounted over the canopy, on the face of a <br />canopy or over any awnings <br /> <br />11.10 Tenant Blade Sign <br /> Location Standards <br />(a) <br />All per zoning <br />district permitted <br /> <br /> <br />i. One Blade sign per tenant space <br />ii. May be located on the ground floor façade only (sign to be <br />mounted below 15 feet as measured from finished grade outside <br />the facade) <br />iii. Maximum area of 15 sq. ft. <br />iv. Will not obstruct any pedestrian or vehicular way. Minimum <br />vertical clearance of ten (10) ft. from the finished sidewalk if it is <br />non-illuminated and eleven (11) ft. from the finished sidewalk if it <br />is illuminated. <br />v. Sign may project no more than three (3) ft. from building wall or <br />a distance equal to 50% of the width of the abutting sidewalk <br />(whichever is less). <br /> <br />