Laserfiche WebLink
Catalog Number:Project No. <br />Project Name <br />Type: <br />Specifications and <br />dimensions subject to <br />change without notice. <br />Eaton <br />1121 Highway 74 South <br />Peachtree City, GA 30269 <br />P: 770-486-4800 <br />www.eaton.com/lighting <br />MSA MESA LED <br />TD516001EN <br />2017-04-26 08:16:45 <br />0-10V (DIM) <br />This fixture is offered standard with 0-10V dimming driver(s). The DIM option provides 0-10V dimming wire leads for use with a lighting control <br />panel or other control method. <br />Photocontrol (PC, PER and PER7) <br />Optional button-type photocontrol (PC) and photocontrol receptacles (PER and PER7) provide a flexible solution to enable “d usk-to-dawn” lighting <br />by sensing light levels. Advanced control systems compatible with NEMA 7-pin standards can be utilized with the PER7 receptacle. <br />Dimming Occupancy Sensor (MS/DIM-LXX, MS/X-LXX and MS-LXX) <br />These sensors are factory installed in the luminaire housing. When the MS/DIM-LXX sensor option is selected, the occupancy sensor is connected <br />to a dimming driver and the entire luminaire dims when there is no activity detected. When activity is detected, the luminaire returns to full light <br />output. The MS/DIM sensor is factor y preset to dim down to approximately 50 percent power with a time delay of five minutes. The MS-LXX sensor <br />is factor y preset to turn the luminaire off af ter five minutes of no activity. The MS/X-LXX is also preset for five minutes and only controls the <br />specified number of light engines to maintain steady output from the remaining light engines. <br />These occupancy sensors includes an integral photocell that can be activated with the FSIR-100 accessory for “dusk-to-dawn” control or daylight <br />harvesting - the factor y preset is OFF. The FSIR-100 is a wireless tool utilized for changing the dimming level, time delay, sensitivity and other <br />parameters. <br />A variety of sensor lens are available to optimize the coverage pattern for mounting heights from 8’-40’. <br />LumaWatt Pro Wireless Control and Monitoring System (LWR-LW and LWR-LN) <br />The LumaWatt Pro system is a peer-to-peer wireless network of luminaire-integral sensors for any sized project. Each sensor is capable of motion <br />and photo sensing, metering power consumption and wireless communication. The end-user can securely create and manage sensor profiles <br />with browser-based management software. The software will automatically broadcast to the sensors via wireless gateways for zone-based and <br />individual luminaire control. The LumaWatt Pro software provides smart building solutions by utilizing the sensor to provide easy-to-use dashboard <br />and analytic capabilities such as improved energy savings, traffic flow analysis, building management software integration and more. <br />For additional details, refer to the LumaWatt Pro product guides. <br />For mounting heights up to 20' (-L20) <br />20 <br />15 <br />10 <br />5 <br />0 <br />20 18 15 12 96 63912 15 1830 20 <br />Coverage Side Area (Feet) <br />0 0 <br />20 <br />30 <br />4016248180 <br />Coverage Side Area (Feet) <br />For mounting heights from 8' to 16' (LWR-LW)For mounting heights from 16' to 40' (LWR-LN) <br />Coverage Side Area (Feet) <br />0102030401020 30 4081824 <br />0 <br />12 <br />8 <br />36 70 <br />Coverage Side Area (Feet) <br />For mounting heights up to 8' (-L08 - Cutoff 8' to 24') <br />7361824551824 <br />0 <br />40 <br />27 <br />15 <br />50 30 0 <br />Coverage Side Area (Feet) <br />For mounting heights up to 40' (-L40W) <br />30 50401020102040 <br />CONTROL OPTIONS