05-05-21 Planning Commission - Laserfiche WebLink

Home Browse Search

Specifications and dimensions subject to change without notice. Eaton 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.eaton.com/lighting page 4 CONTROL OPTIONS PRV / PRV-XL PREVAIL TD500069EN September 30, 2019 9:28 AM page 4 0-10V (D) The dimming option provides 0-10V dimming wire leads for use with a lighting control panel or other control method. Photocontrol (PER and PER7) Photocontrol receptacles provide a flexible solution to enable "dusk-to-dawn" lighting by sensing light levels. Advanced control systems compatible with NEMA 7-pin standards can be utilized with the PER7 receptacle. Dimming Occupancy Sensor (MSP and MS) These sensors are factory installed in the luminaire housing. When a sensor for dimming operation (/DIM) option is selected, the luminaire will dim down to approximately 50 percent power after five minutes of no activity detected. When activity is detected, the luminaire returns to full light output. When a sensor for ON/ OFF operation is selected, the luminaire will turn off after five minutes of no activity. These occupancy sensors include an integral photocell that can be activated or inactivated with the programming remote / configuration tool for "dusk-to-dawn" control or "daylight harvesting". Note: For MSP sensors, the factory preset is ON (Enabled), and for MS sensors, the factory preset is OFF (Disabled). The programming remote / tool is a wireless tool that can be utilized to change the dimming level, time delay, sensitivity and other parameters. A variety of sensor lenses are available to optimize the coverage pattern for mounting heights from 8'-40'. WaveLinx Wireless Control and Monitoring System Available in 7-PIN or 4-PIN configurations, the WaveLinx Outdoor control platform operates on a wireless mesh network based on IEEE 802.15.4 standards enabling wireless control of outdoor lighting. Use the WaveLinx Mobile application for set-up and configuration. At least one Wireless Area Controller (WAC) is required for full functionality and remote communication (including adjustment of any factory pre-sets). WaveLinx Outdoor Control Module (WOLC-7P-10A) A photocontrol that enables astronomic or time-based schedules to provide ON, OFF and dimming control of fixtures utilizing a 7-PIN receptacle. The out-of-box functionality is ON at dusk and OFF at dawn. WaveLinx Wireless Sensor (SWPD4 and SWPD5) These outdoor sensors offer passive infrared (PIR) occupancy and a photocell for closed loop daylight sensing. These sensors c an be factory installed or field-installed via simple, tool-less integration into luminaires equipped with the Zhaga Book 18 compliant 4-PIN receptacle (ZW). These sensors are factory preset to dim down to approximately 50 percent power after 15 minutes of no activity detected. These occupancy sensors include an integral photocell for "dusk-to-dawn" control or daylight harvesting that is factory-enabled. A variety of sensor lenses are available to optimize the coverage pattern for mounting heights from 7'-40'. LumaWatt Pro Wireless Control and Monitoring System (LWR-LW and LWR-LN) The Eaton’s LumaWatt Pro powered by Enlighted is a connected lighting solution that combines LED luminaires with an integrated wireless sensor system. The sensor controls the lighting system in compliance with the latest energy codes and collects valuable data about building performance and use. Software applications turn the granular data into information through energy dashboards and specialized apps that make it simple and help optimize the use of other resources beyond lighting. LumenSafe Integrated Network Security Camera (LD) The LumenSafe integrated network camera is a streamlined, outdoor-ready camera that provides high definition video surveillance. This IP camera solution is optimally designed to integrate into virtually any video management system or security software platform of choice. No additional wiring is needed beyond providing line power to the luminaire. LumenSafe features factory-installed power and networking gear in a variety of networking options allowing security integrators to design the optimal solution for active surveillance. Coverage Side Area (Feet) For mounting heights from 8' to 12' (-L12) 12 8 0 20 15 10 10515205 0 30 22 15 157.5 22 307.5 0 30 20 0 Coverage Side Area (Feet) For mounting heights from 12' to 30' (-L30) Coverage Side Area (Feet) For mounting heights from 9' to 20' (-L20) 30 20 0 Coverage Side Area (Feet) For mounting heights from 21' to 40' (-L40W) 20 15 10 5 0 20 18 15 12 9 6 63 9 12 15 1830 20 50 30 0305040 1020 10 20 40 Coverage Side Area (Feet) For mounting heights from 16' to 40' (SWPD) 01020304010203040 40 30 20 0 Coverage Side Area (Feet) For mounting heights from 8' to 16' (LWR-LW) 16 0 Coverage Side Area (Feet) For mounting heights from 16' to 40' (LWR-LN) 01020304010203040 40 30 20 0 24 18 8 0 8 18 24