05-05-21 Planning Commission - Laserfiche WebLink

Home Browse Search

4/29/2019 KW Industries submittal.info/LightingStandards.asp?Serie=SSP&Print=Yes 1/4 SSP Square Non-Tapered Steel Poles Pole Shaft The pole shaft is one piece construction, being fabricated from a weldable grade carbon steel structural tubing which has a uniform wall thickness of 11 gauge (0.1196"), 7 gauge (0.1793"), or 3 gauge (0.2391"). The pole shaft material shall conform to ASTM A500 Grade C with a minimum yield strength of 50,000 psi. The pole shaft has a full length longitudinal resistance weld and is uniformly square in cross-section with flat sides, small corner radii and excellent torsional properties. Base Plate The anchor base is fabricated from structural quality hot rolled carbon steel plate that meets or exceeds a minimum yield strength of 36,000 psi. The anchor base telescopes the pole shaft and is circumferentially welded top and bottom. All welds are performed in accordance with the American Welding Society specification AWS D1.1, latest edition. Anchor Bolts Anchor bolts are fabricated from commercial quality hot rolled carbon steel bar that meets or exceeds a minimum yield strength of 55,000 psi. Four properly sized anchor bolts, each with two regular hex nuts and washers, are furnished and shipped with all poles unless otherwise specified. Anchor bolts shall have the threaded end galvanized a minimum of 8 inches in accordance with ASTM A153. Fully galvanized anchor bolts are available upon request. Handhole An oval reinforced gasketed handhole, having a nominal 3" x 5" or 4" x 6-1/2" inside opening, located 1'-6" above base, is standard on all poles. Optional 5" x 8" and 4" x 10" handholes are available (see options). A grounding provision is located inside the handhole ring. Finishes The Standard Finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes. Hot dip Galvanized finish to a ASTM A123 specification or primed finish is also available. For optional finishes, see K-KLAD and K-KLAD Over Galvanizing. HOW TO ORDER When ordering KW lighting standards, mounting adaptors and accessories, be sure to specify the complete catalog number. Our catalog numbers reflect the precise specifications of the item ordered to ensure our customers will receive the product which meets their exact requirements. The following explanation of the catalog numbers will be helpful in placing orders: CATALOG LOGIC - ORDERING SAMPLE Catalog Number Nominal Height Pole Shaft Gauge Handhole Size Anchor Bolt Bolt Circle 80 MPH 90 MPH 100 MPH Ship WT. SSP10-4.0-11 10 4.0 x 10.0 11 3 x 5 0.75 x 17 x 3 8 42.1 33.5 27.1 87 SSP10-4.0-7 10 4.0 x 10.0 7 3 x 5 0.75 x 30 x 3 8 55 44 35.5 130 SSP10-5.0-11 10 5.0 x 10.0 11 3 x 5 1.00 x 36 x 4 11 58 44 34 151 SSP12-4.0-11 12 4.0 x 12.0 11 3 x 5 0.75 x 17 x 3 8 33.7 26.7 21.4 100 SSP12-4.0-7 12 4.0 x 12.0 7 3 x 5 0.75 x 30 x 3 8 47.5 37.3 29.8 150 SSP12-5.0-11 12 5.0 x 12.0 11 3 x 5 1.00 x 36 x 4 11 49 38 29 168 SSP14-4.0-11 14 4.0 x 14.0 11 3 x 5 0.75 x 17 x 3 8 27.4 21.5 17.1 113 SSP14-4.0-7 14 4.0 x 14.0 7 3 x 5 0.75 x 30 x 3 8 40 31 24.5 170