05-24-21-R - Laserfiche WebLink

Home Browse Search

City of Arden Hills City Council Meeting for May 24, 2021 P:\Planning\Planning Cases\2021\21-011 - Chick-Fil-A CUP. Master Plan PUD, Final PUD\CC Packet\PH Page 4 of 7 A. The operation consists of one or more drive-up windows and is an integral part of a building containing one or more other allowed uses, or the operation is part of an architecturally unified complex containing two or more businesses using drive-up windows B. Shared access drives and shared parking are utilized by all such businesses using drive-up windows in said building or complex. C. Only one building or architecturally unified complex containing two or more businesses using drive-up windows will be allowed in addition to one freestanding business using a drive-up window. D. The architecture and the site, grading, circulation, landscaping, screening and signage plans shall unify the appearance and function of the complex or building. E. An architecturally unified complex may consist of one or more buildings on one or more parcels if the intent of providing a unified appearance and function is not compromised. F. The applicant shall submit a circulation plan that demonstrates that the use will not interfere or reduce the safety of non-motorized movements, specifically pedestrian and bicyclists. Section 1325.04 also requires any electronic devices, including loudspeakers, be located at least 50’ from any lot line. The nearest order box on the west side of the site is located approximately 20’ from the west property boundary. The applicant is requesting flexibility from this requirement. C. Exterior Materials – Meets Requirements At least seventy-five (75) percent of the exterior building materials should be made of brick masonry, tile masonry, natural stone or its synthetic equivalent, decorative concrete plank, transparent glass or any combination thereof. Trim and other accent or decorative features may be metal, wood, split faced block, EIFS, or stucco. Undesirable materials include simulated brick, vinyl or aluminum siding, sheet or corrugated metal siding, plain concrete blocks or panels, brightly colored metal roofing or canopies, pre-cast tilt-up walls, and mirrored or reflective glass. The proposed building elevations consist of brick veneer with metal coping. During the concept plan discussion, the applicant stated the material finish would be brick. Building elevations are shown in Attachment D. The applicant has submitted a materials board to staff. The figure below illustrates the proposed building materials.