Laserfiche WebLink
SCALE: 1/4" - 1' <br />NOT FOR CONSTRUCTION <br />WWW. CEDARFORESTPRODUCTS.COM <br />800-552-9495 <br />WEST OLIVE, MI 49460 <br />P.O. BOX 145 PRELIMINARY <br />CEDAR FOREST PRODUCTS <br />Model #: RHS1616 <br />Design Criteria: Structure is typically designed for a 25 lb live load and a 90 mph wind load capacity, but can be <br />designed based on specific site requirements upon request. All structural members are ASTM A-500 U.S. grade B <br />steel. Welded connection plates shall be ASTM A-36 hot rolled steel. All fabrication performed to latest AISC <br />standards by AWS Certified welders. All framing connections are done using A325 grade bolts within concealed <br />access openings from above and will later be concealed by the roofing. All roof framing shall be flush against the roof <br />decking to eliminate the possibility of bird nesting. <br />Tubular Steel Columns and Beams: Standard column dimension shall be 5" x 5" x 3/16" tubular steel welded to 5/8" <br />base plates for surface mounting. Main support beams are 7" x 5" x 3/16" and purlins are 5" x 3" x 1/8". Steel sizes <br />are preliminary and may change due to ongoing review and final engineering. <br />Roofing: 24 Ga. pre-cut steel Multi-Rib panels with Kynar 500 finish in a variety of colors with white underside. <br />Standard roof slope is a 6/12 pitch with a eave height of 7'-6". Attached to structural framing with exposed self tapping <br />screws painted to match roof color. Matching 24 Ga. trim included. <br />Frame Finish: All steel framework will receive a corrosion protective TGIC Polyester powder coat, electro-statically <br />applied and cured at 400°F. A large selection of standard colors are available. <br />Foundation: All columns need to be anchored to concrete footings (footing design provided separately). Columns <br />can be surface mounted to footings with anchor bolts at or below finish slab elevation or they can be embedded <br />directly into the footing without base plates upon request. Anchor bolts and bracing templates are included. Optional <br />base plate covers are available at an additional cost. <br />Hardware: All structural hardware and roofing fasteners shall be provided. <br />Warranty: 10 years against manufacturer defects. <br />Not Included: Concrete work of any kind, unloading of product and installation. <br />5" x 5" TUBE STEEL <br />COLUMN (TYP) <br />7" x 5" TUBE STEEL <br />HIP BEAM (TYP) <br />5" x 3" TUBE STEEL <br />PURLIN (TYP) <br />24 GA. PRE-CUT STEEL <br />PANELS & TRIM <br />12 <br />6 <br />16' <br />7'-6" <br />16' <br />13' <br />90° $WWDFKPHQW&