Laserfiche WebLink
2) At the time of sale, a paper or plastic adhesive band, strip or sleeve shall be applied to <br />the container or bottle and extend over the top of the twist type closure, cork, stopper or plug <br />forming a seal that must be broken upon opening of the container or bottle. <br />3) The adhesive band, strip or sleeve shall bear the name and address of the <br />brewer/licensee selling the malt liquor or wine. (revised 3/11/13) <br />4) The containers or bottles shall be identified as malt liquor or wine, contain the name <br />of the malt liquor or wine, bear the name and address of the brewer/licensee selling the malt <br />liquor or wine, and the contents in the container packaged as required herein shall be considered <br />intoxicating liquor unless the alcoholic content is labeled as otherwise in accordance with the <br />provisions of Minnesota Rules, part 7515.1100. (revised 3/11/13) <br />• The retail sales for a brewer/licensee under this subsection may not exceed 3,500 barrels <br />per year, provided that off -sales may not total more than 50 percent of the brewer/licensee's <br />production or 500 barrels, whichever is less. <br />• A brewer operating a brewer taproom may hold or have an interest in other retail on -sale <br />licenses, but may not have an ownership interest in whole or in part, or be an officer, director, <br />agent or employee of, any other manufacturer, brewer, importer, or wholesaler or be an affiliate <br />thereof, whether the affiliation is corporate or by management, direction or control. <br />Notwithstanding this prohibition, a brewer licensed under this provision may be an affiliate or <br />subsidiary company of a brewer licensed in Minnesota or elsewhere if that brewer's only <br />manufacture of malt liquor or wine is: (revised 3/11/13) <br />1) As a brewer taproom as defined herein and limited to the regulations of a brewer <br />taproom by this chapter; <br />2) Manufactured in another state for consumption exclusively in a restaurant located in <br />the place of manufacture or brewing; or <br />3) Manufactured in another state for consumption primarily in a restaurant located in or <br />immediately adjacent to the place of manufacture, if the brewer was licensed subject to the <br />regulations herein on January 1, 1995. <br />SECTION 2. This Ordinance shall become effective immediately upon its passage and <br />publication according to law. A Summary of this Ordinance will be published in accordance with <br />state statute. <br />PASSED and ADOPTED this 12th day of December, 2022, by the City Council of the <br />City of Arden Hills, Minnesota. <br />CITY OF ARDEN HILLS <br />C <br />ATTEST: <br />Julie Hanson, City Clerk <br />David Grant, Mayor <br />Published in the Pioneer Press on 12022 <br />Page 3 of 3 <br />To view the final document, access adopted Ordinances via Arden Hills Public Laserfiche Weblink by visiting <br />cityofardenhills.org and clicking on Archived Documents under Helpful Links on our main webpage <br />