Laserfiche WebLink
GS-12 120v FEATURES <br /> <br /> <br /> <br />Technology Description <br /> <br /> <br /> <br />Minimum Access Opening / <br />Machine Size/Weight <br /> <br /> <br /> <br />Materials of Construction <br />NSF/ANSI Standard 61: <br /> <br /> <br /> <br />Submerisble Motor <br /> <br /> <br />Power Supply/Control Box <br /> <br /> <br />Wiring <br /> <br /> <br />Sealed Tank Fitting <br /> <br /> <br />Retrieval Chain <br /> <br /> <br />Chlorine Boost Connection <br /> <br /> <br />Low Elevation Intake <br /> <br /> <br />Minimum Water Depth <br /> <br /> <br />Accessories Available <br /> <br />Warranty <br />Submersible, grid powered, circulation equipment for potable water tanks and <br />reservoirs. Designed for continuous operation and can be installed through roof <br />hatch without requiring tank entry. <br />Machine can be installed through 12 inch (30 cm) diameter opening. <br />Assembled machine is 3 feet (0.9 meter) in length X 10 inch (25.4 cm ) in <br />diameter and weighs 70 pounds (32 kg). <br />316 stainless steel shell and hardware construction. GS-12 has been <br />constructed using safe materials for contact with potable water and meets <br />NSF/ANSI Standard 61 Certification including Annex G. NSF / ANSI 61 Listed <br />Motor. <br />Submersible motor, designed for continuous operation, low power requirement, <br />direct drive, no gearbox and no lubrication schedule required. <br />Requires 120 VA C power source outlet (15 Amp Service Adequate), nominal <br />power consumption is 1000 Watts. <br />75 ft (22 m) of submersible power conductor included to terminate within <br />junction box at top of tank. Juction box, also included. <br />316 stainless steel tank fitting and cord grip included for sealed cord entry <br />through tank roof. <br />75 ft (22 m) of 316 stainless steel retrieval chain included for machine <br />installation and retrieval without requiring tank entry. <br />Chlorine boost connection point on machine for adapting to 1/2" (13mm) hose <br />for fast chlorine dispersion during in-reservoir boosting. <br />Intake draws water in a horizontal layer within 6 inches (15 cm) of the tank or <br />reservoir floor. <br />At depths below 2 feet (0.6 meters), the machine should be shut off to prevent <br />damage. <br />(1) Portable Chlorine Boost Hose and Boost Pump System, (2) 4-20mA <br />SCADA Package <br />Limited 2-year parts and labor warranty. <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />Subject to change without notice. <br /> <br />SolarBee, Inc • 3225 Hwy 22 • Dickinson, ND 58601 <br />+1 866 437 8076 • Ph +1 701 225 4495 • Fax +1 701 225 0002 • www.solarbee.com <br />GS-12_120-FEATURE_20120627 © 2012 SolarBee,