07-22-24-R - Laserfiche WebLink

Home Browse Search

colors, textures, shapes, massing, building components, height, roof -line, and setback. A full plan set of building elevations is included as Attachment G. Staff has provided the review below on building materials as shared by the Applicant in order for the Planning Commission to attain a better understanding of the full scope of their project design. Building Materials — Flexibility Requested The proposed building elevations consist of brick veneer, transparent glass, metal panels, and wood. The Applicant has requested for the brick veneer to be considered preferred materials as the brick would be actual clay brick, approximately half (1/2) an inch to five eighths (5/8) of an inch thick. Each brick would be individually installed with mortar joints. The Applicant has also requested flexibility from the 75% desirable materials requirement on the south building elevation where there is an existing tall parapet wall above an existing overhang. The Applicant states that there is a concern about this parapet wall's ability to accept additional weight from desirable materials such as brick masonry, tile masonry or natural stone. The proposed south elevation shows metal panels used on the existing parapet wall and the materials for the elevation would consist of 63% desirable materials and 37% accent materials. If these flexibilities in building materials are granted, the Applicant will have met the 75% threshold with desired materials on three elevations based on the calculated use of brick and transparent glass. The Applicant states that the exterior finishes for all elevations would equal 89% desirable materials and 11 % accent materials. Event Center RaMing Required Preferred Materials Proposed Preferred Materials Other Materials Required Transparency Proposed Transparency North Facade 75% 100% 0% N/A 0% EastFagade 75% 96% 4% 50% 11% South Fagade 75% 63% 37% 50% 4% WestFa�ade 75% 95% 5% N/A 1% &_ RenderinzofEast and West Elevations — Event Center Page 12 of 24