06-30-25-SWS - Laserfiche WebLink

Home Browse Search

For the purpose of regulating signs, the following nine sign districts are adopted: District Description District Description 1 All residential properties zoned R-1 or R-2. 2 All non-residential uses in the R-1 through R-4 zoning districts. 3 All residential properties zoned R-3 and R-4. 4 All properties fronting on County Road E east of Highway 51 except for those properties with frontage on Lexington Avenue. 5 All properties fronting on Lexington Avenue South of Interstate 694. All properties zoned for commercial or industrial use fronting on Lexington Avenue north of 6 Interstate 694, properties along Highway 96, and properties located in the B-1 zoning district. 7 All properties in the I -Flex, Gateway Business, or other commercial or industrial district without frontage on a roadway designated above. 8 All properties zoned Neighborhood Business. 9 The parts of the TCAAP area not fronting on Highway 96. 1240.02 Permitted Sign Type, Area, Height, and Illumination by Sign District. All signs shall conform to the applicable standards in Table One: Sign Standards by Sign District. The following provisions shall also apply: Subd. 1 Wall Sign. Wall signs shall not extend more than eighteen (18) inches from the wall they are attached to. Subd. 2 Freestanding Pole or Monument Signs. A. No more than one freestanding sign shall be permitted on any site except in cases where properties front more than one public street. For properties that front more than one public street, an additional freestanding sign may be permitted for each street front provided that each additional freestanding sign does not exceed half the size of the maximum sign area allowed for a freestanding sign in the underlying sign district. B. The sign area of a freestanding sign shall only be calculated using one side of the sign. If the two sides are different sizes, the larger side shall be used for determining sign area. C. Freestanding signs in Sign Districts 4 and 5 shall be monument type ground signs with the copy resting on and supported by a solid base of brick or rock -faced block in a color similar to or complimentary to the main structure on the site. The material of the base must extend at least one-half way up the sides of the sign face. D. Freestanding signs shall be located at least five (5) feet from any property line and shall not project over the property line. However, if the bottom edge of the sign copy is not located at least ten (10) feet above the ground with supports that do not encroach on the clear vision area of approaching traffic, the sign shall be located to preserve the clear vision area. E. The total area of a freestanding sign shall not exceed 1.5 times the permitted sign copy area of a freestanding sign. The total sign area includes all sign copy, graphics, decorative features, borders, and structural supports except for the poles. Subd. 3 Service Area Canopy. Each edge of a service area canopy facing a street is permitted twenty-five (25) square feet of sign area in addition to all other sign area permitted on the site. Such signage may be illuminated externally, internally, or backlit, but no other part of the face of the canopy shall be illuminated. Subd. 4 Awnings and Canopies. No part of an awning or sun canopy shall be less than eight (8) feet or greater than twelve (12) feet above grade. Any sign area on the awning, if illuminated, will be deducted from the permitted wall sign area. The fabric or material used for the awning or canopy must be opaque and no internal illumination is permitted. Table 1240.02 - Sign Standards by Sign District available in PDF, click HERE