06-30-25-SWS - Laserfiche WebLink

Home Browse Search

Docusign Envelope ID: 63ACAE11-BF2F-4D18-8584-6E88FC07AE08 Can you plug it into my existing power outlet? The Flock AC power adapter does not use a standard outlet plug but must be directly wired into the power mains. While using outlet plugs may be convenient, they can easily be unplugged, presenting a tampering risk to this critical safety infrastructure. The electrician can route power directly to the camera with a direct wire -in connection if an outlet is close to the camera. How long does this process typically take? The installation process typically takes 6-8 weeks. To accelerate the process, be sure to have the electrician perform his work shortly after the Flock technician finishes installing the camera. What kind of electrician should I look for? Any licensed electrician should perform this work, though we have found that those who advertise working with landscape lighting are most suited for this work. What happens if the electrician damages the equipment? The customer is responsible for contracting the electrician. Any liability associated with this work would be assumed by the customer. If any future work is required at this site due to the electrical infrastructure or the work performed by the electrician would be the responsibility of the customer. When should the electrician perform his work? Once Flock installs the camera, you will receive an email alert letting you know that this has been completed. After this, you will need to schedule the electrician to route power to the pole. What if my electrician has questions about Flock's AC Kit? You should share the AC -Power Kit Detail: packet with the electrician if they have questions. What if the AC power is on a timer? Sometimes the AC power will be on a timer (like used for exterior lighting). Flock requires that the AC power provided to the camera be constant. The source that the electrician uses must not be on a timing circuit. frock safety 17