333 - Laserfiche WebLink

Home Browse Search

8. All properties zoned Neighborhood Business 9. The parts of the TCAPP area not fronting on Hwy 96 • SECTION VII. PERMITTED SIGN TYPE, AREA, HEIGHT AND ILLUMINATION BY SIGN DISTRICT Permitted Sign Type, Area, Height and Illumination by Sign District. All signs, unless specifically regulated in Section XI, Special Sign Types, shall conform to the applicable standards in the following Table One: Sign Standards by Sign District. Definition of Permitted Sign Types and Lighting A. Sign types 1. Wall sign: A sign mounted parallel to the building facade. Wall signs may not extend more than 18" from the wall they are attached to. 2. Freestanding sign: A self supporting sign on poles, standards or any other base anchored to the ground. No more than one freestanding sign is permitted on any • site. See the special design requirements for freestanding signs in the Lexington Avenue Commercial Sign Overlay District in Section XL C Freestanding signs must be must located to provide at least a I ft. setback from any property line. If the bottom edge of the sign copy is not located more than 10 ft above the ground with supports that do not encroach on the clear vision of approaching traffic from any exit from the site, the sign must be located to preserve the following clear vision area. The clear vision area shall be an area within a triangle created beginning at the intersection of the mid point of the driveway and the curb or edge of pavement line of the street, and extending 35 ft. in the direction of approaching traffic and 25 ft toward the interior of the property, and then a line connecting these two points. 3. Projecting sign: A sign, other than a wall sign, that is attached to and projects from the building facade. Projecting signs are not permitted • 4. Roof sign: A sign mounted on the roof of a building or on a parapet wall. Roof signs are not permitted.