Laserfiche WebLink
<br /> <br /> <br /> SECTION E CERTIFICATION <br /> <br /> This certification is to be signed by a land surveyor, engineer, or architect who is authorized by state or local law to certify elevation <br /> information when the elevation information for Zones A1-A30, AE, AH, A(with 13FE),V1-V30,VE, and V(with BFE) is required. <br /> Community officials who are authorized by local law or ordinance to provide floodplain management information, may also sign the <br /> certification. In the case of Zones AO and A(without a FEMA or community issued BFE), a building official, a property owner, or an <br /> owner's representative may also sign the certification. <br /> Reference level diagrams 6, 7 and 8- Distinguishing Features-If the certifier is unable to certify to breakaway/non-breakaway wall, <br /> enclosure size, location of servicing equipment, area use, wall openings, or unfinished area Feature(s), then list the Feature(s) not <br /> included in the certification under Comments below. The diagram number, Section C, Item 1, must still be entered. <br /> I certify that the information in Secfions 8 and C on this certificate represents my best efforts to interpret the data availab/e. <br /> I understand that any fa/se stafement may be punishable by fine or imprisonment under 18 U.S. Code, Section 1001. <br /> CERTIFIER'S NAME LICENSE NUMBER (or Affix Seal) <br /> <br /> TITLE COMPANY NAME <br /> <br /> ADDRESS CITY STATE ZIP <br /> <br /> SIGNATURE DATE PHONE <br /> Copies should be made of this Certificate for: 1) community official, 2) insurance agent/company, and 3) building owner. <br /> <br /> <br /> COMMENTS: <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> ON WITH <br /> ON PILES, <br /> SLAB BASEMENT PIERS, OR COIUMNS <br /> A V A A V <br /> ZONES ZONES ZONES . ZONES ZONES <br /> REFERENCE <br /> REFERENCE LEVEL REFERENCE <br /> LEVEL BASE FLOOD LEVEL <br /> ELEVATION <br /> BASE BASE <br /> FLOOD ADJACENT REFERENCE FLOOD <br /> G ' ELEVATION REFERENCE ADJACEN7 RADE LEVEL ELEVATION <br /> LEVEL GRADE <br /> qDJACENT';. <br /> GRADE <br /> The diagrams above illustrate the points at which the elevations should be measured in A Zones and V Zones. <br /> Elevations for all A Zones should be measured at the top of the reference level floor. <br /> Elevations for all V Zones should be measured at the bottom of the lowest horizontal structural member. <br /> <br /> Page 2 <br />