Laserfiche WebLink
<br /> I <br /> I 4. Metal ladders shall not be used near electrical power lines. <br /> ,. s. Ladders shall be maintained in good condition by being stored on <br /> supporting racks, or in a specially designated area. <br /> I J. Tree Trimming Operations <br /> 1. All tools and equipment shall be maintained in good condition. <br /> I 2. Safety hats, goggles, gloves and ear protection shall be worn. <br /> I 3. Ropes shall be kept coiled when not in use and shall be inspected <br /> periodically. <br /> I 4. Saws shall be secured from falling while being used in high places. <br /> S. Only authorized personnel shall operate power tools and equipment. <br /> I <br /> 6. Outrigger stabilizers shall be positioned on ground prior to operation oflift <br /> I device or backhoe. <br /> 7. Partially sawed through limbs shall not be allowed to remain in a tree. <br /> .. 8. Chain Saw <br /> I a. Before operations begin, the operator should check the condition of <br /> the chains, blade, and muftler. Report defective parts immediately. <br /> I b. The engine shall be turned off while refueling. <br /> c. The chain saw shall be held with both hands during use. <br /> I d. The operator shall wear a tight fitting shirt and cuffiess slacks to <br /> I minimize the danger of becoming snagged by tree branches. <br /> e. Operators shall inspect wood to be sawed for foreign objects (nails, <br /> I etc.) <br /> f. Cutting directly overhead is prohibited. <br /> I g. Employees shall not operate a chain saw unless there is at least one <br /> other employee in the immediate area in which operations are to <br /> I take place. <br /> t- <br /> 16 <br /> I <br /> ---------- <br />