CCP 07-19-2004 - Laserfiche WebLink

Home Browse Search

. e. Planned Unit Develovment - PUD (D) Those uses allowed only after issuance of a PUD Permit. Uses allowed in a PUD may include Permitted Uses, Uses by Special Use Permit, Accessory Uses and Special Accessory Uses. The underlying Zoning District(s) establishes the basic allowable uses and tbe general development standards. 2. For any new construction or alteration, building pennits must be secured pursuant to the provision of the building code and this ordinance. 3. Where questions arise as to whether a proposed use falls within a pennitted use category and/or a special use category and/or an accessory use category, or whether a specific use that is not included on the Land Use Chart should be allowed in a particular district, the planning commission shall make a recommendation to the City Council which shall make the final determination that the use is similar to other allowable uses in the district or that a Zoning Ordinance Amendment procedure should be initiated. D. PURPOSE OF DISTRICTS. 1. R-l Single Family Residential District a. To establish areas for the development of single family detached housing at a maximum density of approximately 3 units per net acre b. To reserve development areas for single-family housing c. To restrict encroachment of incompatible uses d. To maintain density limitations e. To take advantage of municipal utilities f. To preserve open space 2. R-2 Single Family and Two Family Residential District a. . b. c. d. e. f To establish areas for the development of single and two family housing at a maximmn density of approximately five units per net acre To reserve development areas for single and two family housing To restrict encroachment of incompatible uses To maintain density limitations To take advantage of municipal utilities. To preserve open space 3. R-3 Townhouse and Low Density Multiple Dwelling District a. To provide areas offering a broad development range in housing units with a maximum density of 8 units per net acre b. To retain the environment and character ofless intensive residence areas through carefully established bulk and lot area requirements 4. R-4 Multiple Dwelling District a. To establish areas for the development of multiple dwelling structures with a maximum density of 12 units per net acre. b. To permit the most intensive residential development allowed in the City. c. To maintain an essentially residential character in areas developed at a more intensive density. 5. NB Neighborhood Business District a. b. c. . d. e. To be located at the edge of residential neighborhoods. To provide a limited range of over-the-counter, convenience, retail, and service uses to accommodate the needs of the adjacent residents. To place limitations on the type, size and intensity of uses within this district, given its proximity to residential uses, To place emphasis on convenience for pedestrian, bicycle, and public transportation access to the use. To accommodate, where possible, a public commons giving residents a place to gather and interact with one another. 5-2