CCP 06-26-2006 - Laserfiche WebLink

Home Browse Search

. . . E. All commercial and il1dustrial properties fronting on Lexington Avenue South of! 694 F. All properties zoned for commercial or industrial use fronting on Lexington Avenue north of I 694, Hwy 96, or located in a B-1 zOlllng district. G. All properties in the I Flex, Gateway Business, or other commercial or il1dustrial district without frontage on an roadway designated above H. All propertics zoned Neighborhood Busil1ess I. The parts of the TCAPP area not fronting 011 Hwy 96 333.7 Permitted Sign Tvpe, Area, Height, and IIInmination by Sign District. All signs, unless specifically regulated in Table I, Speeial Sign Types, shall conform to the applicable standards in the followil1g Table One: Sign Standards by Sign District. 333.8 Definition of Permitted Sign Types and Lighting. Subd. 1. Sign Types. A. Wall Sign. A sign mounted parallel to the building facade. Wall signs may not extend more than 18 inches from the wall they are attached to. B. Freestanding Sign. A self supporting sign on poles, stal1dards or any other base anchored to the ground. No more than one freestandil1g sign is permitted on any site. See the special design requiremel1ts for freestanding signs in the Lexington A venue Commercial Sign Overlay District in Table 1. Freestanding signs must be must located to provide at least a I foot setback from al1Y property line. If the bottom edge of the sign copy is not located more thal1 10 feet above the groul1d with supports that do not cncroach on the clcar visiol1 of approaching traffic from any exit from the site, the sign must be located to preserve the following clear vision area: C. Projecting Sign. A sign, other than a wall sign, that is attached to and projects from the building facadc. Projecting signs are not pcrmitted. D. Roof Sign. A sigl1 mounted on thc roof of a building or on a parapet wall. Roof signs are not permitted. Updated: 01-30-2006 Ordinance 333 Page 3