Laserfiche WebLink
CITY OF C.E\TERVILLE WATER DEPARTMENT <br /> INSTALLATIO\ NFORNIATION FOR <br /> TOUCH READ REMOTE TOUCH PAD NIODLZE <br /> IMPORTP?4T <br /> For ease of -installation, follow these step by step instructions. <br /> �-e sure that the met er is the right size and the register is =n the <br /> cesired units of measurement. Install the water meter in the line as <br /> cre=_cribed by local cote 2nd In the proper direction as indicated by the <br /> a -row on the meter. <br /> Necessary Tools and Material <br /> - 3- conductor, 18 sauce, solid conductor vinyl- covered cable for distances <br /> uo to loo feet. <br /> - r.lectric drill & bit (1/4 ") <br /> - Scre`.vd -iver <br /> - wire striooer <br /> Sze - ler riith 3/8" non- corrosive _taoles (electrical nor:- interference wire <br /> ` typ e ) <br /> - r10 fl at -head or oval countersunk head wood screws at least one inch lone <br /> P'_astic anchor plucs for masonry wall installations <br /> Lead seals and seal wire <br /> -=ual Reader for system test and I.D. c:;eck <br /> rn=_teliatien Instructions <br /> To`dch Pad and Cable installation <br /> 1 select the touch Dad location On the wall. Drill a lit" di ameter cable <br /> entry hole in a location convenient to the touch pad. (The hole should <br /> be located behind the touch Thad for max1J7um Protection and to <br /> discourage tam.perinc.) <br /> 2. 'or ease of the reading operation, the touch pad should 1]e mounter. <br /> approximately 43" above ground level. Use the touch pad as a template <br /> to locate the mounting holes. <br /> 3. if the drilled cable hole is not located directly behind the touch pad, <br /> it will be necessary to break out one of the thin side wall panels to <br /> gain access to the wire channel (see _illustration 1). <br /> Illustration 1 - Touch Pad SACK VIEW <br /> wi« <br />