2006-03-14 P & Z - Laserfiche WebLink

Home Browse Search

The design of a PUD shall take into account the relationship of the site to the surrounding areas. The perimeter of the PUD shall be so designed as to minimize undesirable impact of the PUD on adjacent properties, and conversely, to minimize undesirable impact of adjacent land use and development characteristics on the PUD. 1154.222 SIZE. A PUD may be used on any development of more than two (2) residential units. A PUD may be used for any commercial or industrial development or on developments that include a combination of uses. The Planning & Zoning Commission may require that any development be submitted as a PUD when in their opinion the proposed development could be best handled as a PUD. 1154.223 MINIMUM LOT SIZE. The minimum lot size requirements of other sections of this chapter do not apply to a PUD except that the minimum lot size requirements of the underlying zone shall serve as a general guideline to determine the maximum dwelling unit density of the total development. 1154.224 SETBACK AND SIDE YARD REQUIREMENTS. Notwithstanding other provisions of this subchapter, setback and side yard requirements of lots in a PUD shall be at least equivalent to the spacing requirements of buildings similarly developed under the terms of this chapter on separate parcels. 1154.225 ACCESS TO PUBLIC RIGHT-OF-WAY. The site ofa PUD shall abut, and the major internal street or streets serving the PUD shall be connected to, at least 1 primary arterial, or neighborhood collector street. 1154.226 UTILITY REQUIREMENTS. Utilities, including telephone and electrical systems, installed within a PUD shall be placed underground. Utility appurtenances, which can be effectively screened, may be exempted from this requirement if the city finds that the exception will be consistent with the objectives of this subchapter and the character of the proposed PUD. 1154.227 OPEN SPACE.