2019-04-10 CC Packet - Laserfiche WebLink

Home Browse Search

All colors shall match the background of any wireless support structure that the facilities are located upon, including equipment cabinets. Notwithstanding the foregoing, in the case of existing wood utility poles, finishes of conduit shall be zinc, aluminum or stainless steel, or colored to match those metal finishes, and equipment cabinets shall be the color of brushed aluminum. D. EQUIPMENT ENCLOSURES/CONCEALMENT 1. Equipment enclosures, including electric meters, shall be as small as possible, but in no event larger than 28 cubic feet in volume. Ground-mounted equipment shall incorporate concealment elements into the proposed design matching color and materials of the wireless support structure, unless other materials or colors are approved by the City. Concealment may include, but shall not be limited to, landscaping, strategic placement in less obtrusive locations and placement within existing or replacement street furniture. 2. Radio equipment shall be fully enclosed within an equipment cabinet or concealed within the antenna shroud enclosure matching the color and materials of the wireless support structure, unless other materials or colors are approved by the City. 3. Landscaping concealing equipment enclosures shall be planted in such quantity and size such that 100% screening is achieved within two years of installation. E. SIGNAGE/LOGOS/LIGHTS/DECALS/COOLING FANS 1. Signage: The small wireless facility permittee shall post its name, location, identifying information, and emergency telephone number in an area on the cabinet of the small wireless facility that is visible to the public. Signage required under this section shall not exceed 4 inches by 6 inches, unless otherwise required by law (e.g. radio-frequency (RF) ground notification signs) or the City. If no cabinet exists, the signage shall be placed at the base of the pole. 2. Lights: New small wireless facilities and wireless support structures shall not be illuminated, except in accord with state or federal regulations, or unless illumination is integral to the camouflaging strategy such as design intended to look like a street light pole. 3. Logos/Decals: The small wireless facility operator/permittee shall remove or paint over unnecessary equipment manufacturer decals. The color shall match or shall be as approved by the City. Small wireless facilities and wireless support structures shall not include advertisements and may only display information required by a federal, state or local agency. The small wireless facility operator/permittee shall utilize the smallest and lowest visibility RF warning 174