Laserfiche WebLink
<br />STATE OF MINNESOTA <br />PRICING PAGE <br /> <br />#330/350-1099 <br /> <br />2.0 - Box hoist Make & Model <br /> <br />J-CRAFT/RUGBY LR-27(N) <br />(For 10' & 11' Body Application) <br /> <br />Class & Type <br /> <br />NTEA class 50, Type I underbody <br />(conventional scissor type) <br /> <br />Rated Capacity <br /> <br />14.1 ton -10' dump body <br />12.7 ton - 11' dump body <br /> <br />Maximum PSI operating Pressure <br /> <br />2,450 PSI maximum <br /> <br />Cylinder Bore & stroke <br /> <br />7 dia x 20" stroke <br /> <br />Piston Rod diameter & description <br /> <br />2" dia NITRIDED finish <br /> <br />Subframe construction <br /> <br />NONE (Subframeless design) <br />Hinge point is constructed of 5" x 5" <br />angle, with 1" thick pin supports, & <br />3%" thick solid hinge blocks. Pivot <br />pins are 2" diameter and greasable. <br />(2) OSHA approved safety props are <br />included. MAX mounting height = 8W' <br /> <br />Is installation included in price (Y/N) <br /> <br />YES, to a clean frame truck that will <br />accept hoist unit, hinge point & safety <br />props without modification. Hoses & <br />fittings from hoist to existing valve <br />included. <br /> <br />Warranty <br /> <br />24 months from "IN-SERVICE" date on <br />cylinder rod, leakage, or scoring. / <br /> <br />Price $2,006.00 V <br /> <br />2.2 - Cost per loaded mile for pickup and/or <br />delivery of vehicle Price $ 1.00/mile <br />NOTE: If combined with another major component, Only charges <br />for total miles of transportation will be incurred <br /> <br />(applicable sales tax not included in prices) <br /> <br />Vendor: <br />Contact Person: <br />Address: <br /> <br />Phone #: <br />Fax#: <br />E-Mail Address: <br /> <br />J-CRAFT, Inc. <br />Tim Erickson <br />70127 - 330th Street <br />Kimball, MN 55353 <br />800-864-3828 <br />320-398-6123 <br />tim eric k@hutchtel.net <br /> <br /> <br />Page 1 of 1 <br />