Laserfiche WebLink
<br />". <br /> <br />From:EARL F. ANDERSEN INC. <br /> <br />952 884 5619 <br /> <br />07/07/2004 12:00 #618 P.003/005 <br /> <br />S <br /> <br /> <br />Sk~tlii/l/J;avlii1~ <br />J :ISP ECSI14 5\145894 DO.PB5 <br /> <br />Parts list <br /> <br />Part# <br /> <br />DescrJptlon Qty. <br />Crind Rails <br />12" Round Rail 10', Black """..................................1 <br />12" Flet Rail 10', Black ............................................. I <br />IS" Flat Rail I 0'. Black .........................".................. 1 <br /> <br />145.569-00 <br />145570-00 <br />145571-00 <br /> <br />111394-00 <br />100263-00 <br />] 00327-00 <br />100362-00 <br /> <br />4.l;lole (8M) Hardware PAckage ................"......... 2 <br />'I." )( 2 'I: Bxpension Anchor .................................. 8 <br />"1," Stlltld.arc! Hex Nut. SST ...................................... 8 <br />'I." Flat Washer. SST ................................................. 8 <br /> <br />~eclflcatjons <br /> <br />Rou~d Grind Rail: Weldment comprised of 2.375" 0.0. RS40 (.130" - <br />.140") galvanized ste~l tubing and 1/." HRPO steel <br />sheet. Finish: Powdercoat, black in color. <br /> <br />F1at Grlnd Rail: Weldment comprised of3" x 2" x I/~" (.125" wall)' 2) <br />rectangular steel mbing and 'I." HRPO steel sheet. <br />Finish: Powder-coat, black in color. <br /> <br />...\T17fl1I1"P!'1.ITIrI'kW'lI........~U1 ~lfiff1.1'1"rR I ~~IIlJ.[;'& ~ IUllfflWTIIhui. <br /> <br />Skatewave Grind Rails <br /> <br />Installation Instructions <br /> <br />I) <br /> <br />"Refer to your 2D and 3D plan for your configuration. <br /> <br />Round & Flat Ralls <br /> <br />(Installing Independent Rails in Concrete) Position rait and drill )/." <br />x 3" deep holes through base plates using hammer drill and lIt" ms- <br />somy bit. Tap expansion anchors into drilled holes. Fasten base plates <br />to expansion anchors using J/e" standard hex nuts with l/." Oat wash- <br />ers. <br /> <br />(Installing Independent Rails in Asphalt) We recommend a sur- <br />face mount approach using Q conCrete footing. Dig a 12" diameter x <br />14" deep hole. Fill hole with concrete and let cure. Position rail and <br />drill l/S" X 3" deep holes through base plates using hammer drill and <br />l/," masonry bit. Tap expansion anchors into drilled holes. Fasten <br />base plates to expansion anchors using J/~" standard hex nuts with 3/S" <br />flat washers. <br /> <br />Double check all hardware connections to make sure everything is <br />light. <br />