2008-07-01 P & Z - Laserfiche WebLink

Metadata

Thumbnails

Annotations

, , The following maps and data shall be submitted with the application for preliminary plat approval. These maps and data may be on separate sheets or combined on one sheet, depending on the size and complexity of the proposed subdivision. The overall size of the sheets shall be determined by the City Engineer. (A) Location map. A map ofthe proposed subdivision showing: (1) Boundary lines of the proposed subdivision, clearly indicated; (2) Existing zoning of the tract and adjacent properties; (3) Total approximate acreage in the plan; (4) Location, widths and names of all existing or previously platted streets or other public ways, showing types of improvements, if any railroad and utility rights-of-way, parks and other public open spaces, permanent building and structures, easements and section and corporate lines within the tract and to a distance of 100 feet beyond the tract. (B) Site map. A map of the proposed subdivision and all lands within 500 feet of its boundaries showing: (1) Contours of the site at vertical intervals of two feet; (2) Character and location of natural or artificial features existing on the land which would affect the design of the subdivision, such as wooded areas, drainage ditches, direction and gradient of ground slope, embankments, retaining walls, buildings or nonresidential usage of land; (3) Names of owners of properties adjacent to the subdivision; ::: :::::::: ::::: ~e':$~~tt::~~~~~:f~ t. , \.1 \ Ft. (6) Utilities, including the size, capacity and facilities, water lines, gas mains and power lines; (7) Areas subject to periodic overflow of flood or stormwaters; (8) Tract boundary lines by calcu]ated distances and bearings; and (9) Title, graphic scale, north point and date. (C) Subdivision plat. A plat of a proposed subdivision drawn on an overlay of the topography at a scale no smaller than ] 00 feet to one inch, showing: 5]