Laserfiche WebLink
<br />register record for each occupant registered shall not be destroyed for a period of three years following <br />the date of departure of the registrant from the development. The register shall contain the following <br />information: <br /> <br />(i) The name and address of each manufactured home occupant: <br /> <br />(ij) The name and address of the owner of each manufactured home: <br /> <br />vehicle: <br /> <br />(iii) The make. model. year and license number of each manufactured home and motor <br /> <br />(iv) The state. territory or country issuing the licenses: and <br /> <br />(v) The date of arrival and of departure of each manufactured home. <br /> <br />(4) The licensee shall designate or emplov a caretaker who shall be in charge at all times to <br />keep the planned manufactured home development. its facilities and equipment in a clean. orderlv and <br />sanitary condition. The attendant or caretaker shall be answerable. with the licensee. for the violation <br />of any provision of this Code or State law to which the licensee is subiect. <br /> <br />PLAT SPECIFICATIONS AND PROCEDURE <br /> <br />~ 153.55 GENERAL. <br /> <br />In a subdivision for residential use of less than five lots and where the lots abut existing public <br />roads and utilities, the Council may waive certain requirements such as topographic, street and utility <br />specifications; in that instance the information is not required. <br /> <br />~ 153.56 SKETCH PLAN. <br /> <br />The subdivider shall prepare a sketch plan to present to the Planning and Zoning Commission at <br />the advisory meeting. This plan may be drawn as a freehand pencil sketch and does not require precise <br />dimensions or any special sheet size. This sketch plan may be used to show the Commission the <br />location, proposed street and lot layout and any other significant features of the proposed subdivision. <br /> <br />~ 153.57 PRELIMINARY PLAT. <br /> <br />The following maps and data shall be submitted with the application for preliminary plat approval. <br />These maps and data may be on separate sheets or combined on one sheet, depending on the size and <br />complexity of the proposed subdivision. The overall size of the sheets shall be determined by the City <br />Engineer. <br /> <br />50 <br />