2000-05-02 P & Z Agenda - Laserfiche WebLink

Home Browse Search

Division 95: Commercial Exterior Buildina Materials Except; as otherwise regulated herein, the exterior wall surfaces of all new or expanded commercial buildings shall consist of face brick, finished block or other textured masonry product approved by the Planning and Zoning Commission. Exceptions to at! masonry exteriors may be considered and approved by the Planning and Zoning Commission provided the following findings are met: A. At least sixty percent (60%) of the exterior surface is masonry. B. The combination of exterior materials is used as an architectural compliment to the structure. C. The combination of exterior materials used is not inconsistent with the quality and appearance used on similar buildings in the same zoning district or neighborhood. D. Site conditions limit public exposure to certain exterior surfaces where masonry products are not proposed. E. An exterior wall may be temporary and a future expansion area of a structure and be subject to removal or redesign as an interior wall. Buildings are required to have contrasting architectural features and must be designed to be aesthetically pleasing. Division 100: Industrial Exterior BuildinQ Materials Industrial buildings are required to be constructed of brick, decorative block or approved textured masonry product. Pole barn type buildings are not allowed. Buildings are required to have contrasting architectural features and must be designed to be aesthetically pleasing. Division 105: Fences A. A site plan must be approved by the Building Official for any fence installed for any purpose prior to installation of same. A site plan showing the location of the fence shall be submitted with the permit application. B. All fences shall be located entirely upon the property of the fence owner unless the owner of the adjoining property agrees, in writing, that said fence may be erected on the property line of the respective Page 30 of 65