2003-08-05 P & Z Agenda - Laserfiche WebLink

Home Browse Search

~ , Emotive 915100 Cityof~,Onl#4 ... ." The~~Ol.r.J1~llW;~forliM..":"dMU8fI. OltI*~ahom&~, sh8II require Site Plan approval by the Planning and Zoning Commission. Factors to be considered for such a use conversion include, but are not limited to, compatibility with adjacent land uses, structural appearance, structural adaptability, investment relationship, term or length of conversion (interim or permanent) and consistency with any land use plans prepared by the City for the Mixed Use District. The architectural design and exteriOr bUilding materiafs used in COl'1neCtIon with any new or expanded use or structure shall be consistent with any architectural design or aesthetic control requirements established by the City for the Mixed Use District. In new residential subdivisions In M-1, R-2A, R-2, R-3 and R-4R$Sidential Zoning DiStritts, structures may be arranged to include one (1) zero lot line provided that no windows or doors open on this side of the structure. The appropriate setbacks apply. Division 90: Commercial ~erior Buildina Materials Except; as otherwise regulated herein, the exterior wall surfaces of all new or expanded commercial buildings shall consist of face brick, finished block or other textured masonry product approved by the Planning and Zoning Commission. Exceptions to all masonry exteriors may be considered and approved by the Planning and Zoning Commission provided the following findings are met: A. The combination of exterior materials is used as an architectural compliment to the structure. B. The combination of exterior materials used is not inconsistent with the quality and appearance used on similar buildings in the same zoning district or neighborhood. C. Site conditions limit public exposure to certain exterior surfaces where masonry products are not proposed. D. An exterior wall may be temporary and a future expansion area of a structure and be subject to removal or redesign as an interior wall. Buildings are required to have contrasting architectural features and must be designed to be aesthetically pleasing. Division 95: Industrial Exterior Buildina Materials Industrial buildings are required to be constructed of brick, decorative block or approved textured masonry product. Pole bam type buildings are not allowed. Buildings are required to have contrasting architectural features and must be designed to be aesthetically pleasing.