Laserfiche WebLink
Emission Test Report <br /> EMC WA-2-08 <br /> Section 4 <br /> Revision: 0 <br /> Date:September 30, 1999 <br /> Page 1 of 9 <br /> Section 4. <br /> Sampling, Analytical, and Process [data <br /> Collection <br /> Procedures <br /> The sampling, analysis, and process data collection procedures used for this test <br /> project are described in this section. The published methods and MR1 Standard operating <br /> Procedures (SOPS)used are cited. Details providing clarification and any modifications to <br /> r or deviations from the published methods are resented in this..F p p section. otherwise,the <br /> 4 <br /> F cited methods were followed. <br /> r <br /> 4.1 <br /> Sampling Procedures <br /> The samples collected required the use of four(4)sam lin s stems at both sam li� sampling Y sampling <br /> locations: <br /> • EPA Method 23 isokinetic sampling train for PCDDs and PCDFs, along with an <br /> EPA Method 3B integrated gas sampling train for carbon dioxide (CO2)and <br /> oxygen (02)' <br /> EPA Method 29 isokinetic sampling train for metals (Cd,Hg,and Pb), along with <br /> an EPA Method 3B integrated gas sampling train. <br /> p g <br /> • EPA Method 26A isokinetic sampling train for PM and HCI, along with an EPA <br /> .. Method 3B integrated gas sampling train. <br /> f - <br /> • EPA Instrumental Analyzer Methods 6C, 7E, and 10 sampling and analytical <br /> system for SO2,NOx, and CO. Method 3A instrumentation was also added for <br /> x: COz and oz data collection for normalizing the SO2,NOx, and CO results if <br /> _. needed. <br /> 4k: <br /> The following methods were employed in the use and operation of these sampling <br /> trains and systems. <br /> 4.1.1 Sample and Velocity Traverses <br /> F. <br /> Method 1 in Appendix A of 40 CFR 60(basis for MRI SOP MRI 8401)was used to <br /> establish traverse(sampling)points at the test locations for the traversing sampling trains. <br /> MRI-AWM051-08.43 54.wpd <br />