2003_0915_packet - Laserfiche WebLink

Home

20. Solid wastes, hazardous wastes, storage tanks a. Describe types, amounts and compositions of solid or hazardous wastes, including solid animal manure, sludge and ash, produced during construction and operation. Identify method and location of disposal. For projects generating municipal solid waste, indices if there is a source separation plan; describe hour the project will be modified for recycling. If hazardous waste is generated, indicate if there is a hazardous waste minimization plan and routine hazardous waste reduction assessments. b. Identify any toxic or hazardous materials to be used or present at the site and identify treasures to be used to prevent there from contaminating groundwater. If the use of tonic or hazardous materials will lead to a regulated waste, discharge or emission, discuss any alternatives considered to minimize or elirainate the waste, discharge or emission. c. Indicate the number, location, size and use of any above or below ground tanks to store petroleum products or other materials, except water. Describe any emergency response containment plans. 21. Traffic. Parking spaces added . Existing spaces (if project involves expansion) . Estimated total average daily traffic generated . Estimated maximum peak hour traffic generated (if known) and time of occurrence . Provide an estimate of the impact on traffic congestion on affected roads and describe any traffic improvements necessary. If the project is within the Twin Cities metropolitan area, discuss its impact on the regional transportation system. 22. Vehicle- related air emissions. Estimate the effect of the project's traffic generation on air quality, including carbon monoxide levels. Discuss the effect of traffic improvements or other mitigation measures on air quality impacts. Note; If the project involves Soo or more parking spaces, consult EA W Guidelines about whether a detailed air quality analysis is needed. 23. Stationary source air emissions. Descnibe the type, sources, quantities and compositions of any emissions from stationary sources of air emissions such as boilers, exhaust stacks or fugitive dust sources. Include any hazardous air pollutants (consult EAW Guidelines for a listing) and any greenhouse gases (such as carbon dioxide, methane, nitrous oxide) and ozone- depleting chemicals (chloro- fluorocarbons, hydrofluorocarbons, perfluorocarbons or sulfur hexa#luoride). Also describe any proposed pollution prevention techniques and proposed air pollution control devices. Descn'be the impacts on air quality. 24. odors, noise and dust. will the project generate odors, noise or dust during construction or during operation's ❑ Yes ❑ No If fires, describe sources, characteristics, duration, quantities or intensity and any proposed measures to mitigate adverse impacts. Also identify locations of nearby sensitive receptors and estimate impacts on them. Discuss potential impacts on human health or quality of life. (Tote: fugitive dust generated by operations may be discussed at item 23 instead of here.) 25. Nearby resources. Are any of the following resources on or in proximity to the site? Archaeological, historical or architectural resources? ❑ Yes ❑ No Prime or unique farmlands or land within an agricultural preserve? ❑ Yes ❑ No Designated parks, recreation areas or trails? ❑ Yes ❑ No Scenic views and vistas? 0 Yes ❑ o Other unique resources? ❑ Yes ❑ No If fires, describe the resource and identify any project - related impacts on the resource. Describe any measures to minimize or avoid adverse impacts.