Laserfiche WebLink
CB, RB, O/BP, and CMU Districts <br /> <br /> <br /> <br /> <br /> <br /> <br />TypeMaximum Number Maximum Sign Placement Restrictions <br />AllowedArea AllowedLocation <br />Wall SignMultiple1.5 sq. ft. per lineal Installed on Sign area for all <br />foot of tenant space exterior sides of building <br />or building front building wall or (including fuel <br />(main public entry asfacadecanopy) is <br />per determination by capped at the <br />Community Maximum Size <br />Development Allowed <br />Department).(column 3). <br />Freestanding1 on interior lot, 2 100 sq. ft. maximum 15 foot <br />Signson through lot or on a single sided minimum from <br />multiple frontage sign or 200 sq. ft. a property line. <br />lot; or as approved maximum on a 25 foot <br />w/master sign plan. double sided sign. maximum <br />height <br /> <br /> <br /> <br />B.Directional Signs: Directional signs may be incorporated into a development including <br /> <br /> <br /> <br />information such as traffic directions, house numbers, management office location, or <br /> <br /> <br /> <br />other information necessary to direct persons to facilities or areas within the <br /> <br /> <br /> <br />development. <br /> <br /> <br /> <br />1.Directional signs shall not exceed 8 square feet in size and 8 feet in height and are not <br /> <br /> <br />closer than 1 foot from a public street right-of-way, unless approved as a component <br /> <br /> <br /> <br />of a Master Sign Plan. <br /> <br /> <br />2.Off-site directional signs are prohibited. <br /> <br /> <br /> <br />3.Where applicable, directional signs are required to be incorporated into an approved <br /> <br /> <br />Master Sign Plan. <br /> <br />  <br />1010.06: Sign Area Computation <br /> <br />  <br />A.Computation of Sign Surface Area of Individual Cabinet or Panel Sign: To compute the <br /> <br />  <br />area for a cabinet or panel sign face: Compute by means of the smallest square, rectangle, <br /> <br />  <br />circle, triangle, or combination thereof that will encompass the extreme limit of the copy, <br /> <br />  <br />representation, logo, emblem, or other display, together with any material or color <br /> <br /> <br /> <br />forming an integral part of the background or the display or used to differentiate the sign <br /> <br /> <br /> <br /> <br />from the backdrop or structure against which it is attached or affixed, but not including <br /> <br /> <br /> <br />any support framework, bracing, or decorative fence or wall when such fence or wall <br /> <br /> <br /> <br /> <br />otherwise meets the pertinent zoning regulations and is clearly incidental to the display <br /> <br /> <br /> <br />itself. <br /> <br /> <br /> <br />B.Computation of Sign Surface Area of Individual Signs Mounted Letters or Symbols: <br /> <br /> <br /> <br />When a sign is composed of individual mounted letters or symbols, the sign surface area <br /> <br /> <br /> <br />tm; <br /> šE <br /> <br /> <br /> <br />