Laserfiche WebLink
CB,RB, OBP, and CMU Districts <br /> Type Maximum Number Maximum Sign Placement Restrictions <br /> Allowed Area Allowed Location <br /> Wall Sign Multiple 1.5 sq. ft. per lineal Installed on Sign area for all <br /> foot of tenant space exterior sides of building <br /> or building front building wall or (including fuel <br /> (main public entry as facade canopy) is <br /> per determination by capped at the <br /> Community Maximum Size <br /> Development Allowed <br /> Department). (column 3). <br /> Freestanding 1 on interior lot, 2 100 sq. ft. maximum 15 foot <br /> Signs on through lot or on a single sided minimum from <br /> multiple frontage sign or 200 sq. ft. a property line. <br /> lot; or as approved maximum on a 25 foot <br /> w/master sign plan. double sided sign. maximum <br /> height <br /> B. Directional Signs: Directional signs may be incorporated into a development including <br /> information such as traffic directions,house numbers, management office location, or <br /> other information necessary to direct persons to facilities or areas within the <br /> development. <br /> 1. Directional signs shall not exceed 8 square feet in size and 8 feet in height and are not <br /> closer than 1 foot from a public street right-of-way,unless approved as a component <br /> of a Master Sign Plan. <br /> 2. Off-site directional signs are prohibited. <br /> 3. Where applicable, directional signs are required to be incorporated into an approved <br /> Master Sign Plan. <br /> 1010.06: Sign Area Computation <br /> A. Computation of Sign Surface Area of Individual Cabinet or Panel Sign: To compute the <br /> area for a cabinet or panel sign face: Compute by means of the smallest square,rectangle, <br /> circle, triangle, or combination thereof that will encompass the extreme limit of the copy, <br /> representation, logo, emblem, or other display, together with any material or color <br /> forming an integral part of the background or the display or used to differentiate the sign <br /> from the backdrop or structure against which it is attached or affixed,but not including <br /> any support framework, bracing, or decorative fence or wall when such fence or wall <br /> otherwise meets the pertinent zoning regulations and is clearly incidental to the display <br /> itself. <br /> B. Computation of Sign Surface Area of Individual Signs Mounted Letters or Symbols: <br /> When a sign is composed of individual mounted letters or symbols, the sign surface area <br /> Page 10 of 18 <br />