Laserfiche WebLink
Residential Stormwater Credit Program DRAFT ver2 <br />Purpose: <br />The purpose of the Stormwater Credit Program is to encourage city property owners to manage rainwater in ways that <br />help deal with problems arising from stormwater runoff in an urban environment. In Roseville, the large amount of <br />impervious surfaces such as asphalt, concrete, roofs, sidewalks, etc., stop stormwater from naturally absorbing into the <br />ground. The runoff from these areas transports pollutants like phosphorus, nitrogen, heavy metals, petrochemicals, <br />fertilizer, pet waste and other common chemicals to receiving bodies of water and this is a major source of water <br />pollution in urban areas. In an urban environment, the amount of impervious area on a property is the most significant <br />factor affecting the quality and quantity of stormwater runoff. By using stormwater Best Management Practices (BMPs) <br />property owners can partially duplicate the effect of the open areas and wetlands that provided natural drainage prior <br />to urbanization. <br />The program offers Residential Property owners up to a 50% credit to their annual stormwater fee based on the <br />percentage of their impervious surface they disconnect from the city infrastructure based on the volume from a 1" <br />rainfall. Only the drainage area that is treated will be eligible for credit. This program does not provide credits for <br />practices that are required by a permit. Practices that go above and beyond the permit are eligible for stormwater <br />credits. Property owners that receive cost share funding from a watershed district, state agency, etc., are eligible for the <br />stormwater credit program. <br />Below is a partial list of stormwater BMPs approved for use in the Stormwater Credits Program: <br />Raingardens, pervious pavers, wet ponds, dry wells, sand filters, filter strips, infiltration trenches, green roofs <br />The installed BMP's will be certified by the property owner, or agent of the property owner, to show that the BMP is still <br />functioning as designed. Certification will need to be provided, at a minimum, every 5 years after the city has approved <br />the project. <br />Example: In 2014, a single family residential property has an annual stormwater fee of $46.80. The property owner <br />adds a raingarden sized to capture the volume from a 1" rainfall. The amount of impervious area they treat as a <br />percentage of their property will dictate the stormwater credit they will receive annually. Below is the breakdown based <br />on the percent of impervious area they capture: <br />Annual Stormwater Fee <br />$46.80 <br />Impervious <br />Area Treated <br />Credit % <br />Annual Fee <br />Reduction <br />New Annual <br />Stormwater Fee <br />25% <br />12.5% <br />$5.85 <br />$40.95 <br />50% <br />25% <br />$11.70 <br />$35.10 <br />75% <br />37.5% <br />$17.55 <br />$29.25 <br />100% <br />50% <br />$23.40 <br />$23.40 <br />Updated: 19 March 2014 <br />R: \PublicWorks\ Engineering\ Drainage \Storm WaterUtility \Stormwater Credit Memo Draft ver2.docx <br />