pf_02976 - Laserfiche WebLink

Home

1.0 INSPECTION SUMMARY The asbestos inspection of the NCR Comten Training Center found the following aSbestos-containing materials and approximate quantities: 1. Thermal Systems Insulation = 120 Fittings 10 Linear Feet 2. Thermal Water Heater Insulation = 210 Square Feet 3. Floor Tile (9" x 9") = 7,500 Square Feet These materials have isolated damage and should be repaired or removed. All but about 10 linear feet of pipe insulation was determined to be nonasbestos. 2.0 INSPECTION HETHODS The asbestos inspection of the NCR facility was conducted by Mr. Mark inspector and management planner. conducted on May 17, 1991. The ~urpose of the ins~ection was to identify, quantify, evaluate cond1tion of, accessib1lity of, and indicate location of aSbestos-containing materials (ACM)--both friable and nonfriable types. Comten Training Center Sonaglia a certified asbestos Inspection of the facility was Floor plans for the facility were provided br HCR Comten to provide recordkeeping by mapping the sample ocation of the suspect materials. The entire facility was inspected for suspect aSbestos-containing laterials. Sus~ect ACM {such as thermal insulation on pipes, and other hot/cold 1tems, ce1ling and floor tile, ceiling panels, and hardboard sheeting) was observed, touched, representatively sampled, and submitted to Braun Laboratories for analysis to ~etermine the percent concentration and type of asbestos (if any) In the samples. Location of sam~les are shown on the accompanying figures. Refer to F1gures 1-6. ~t is possible that not all the ACM in the facility was dentified. For example, roofing materials, non-accessible iling plenums, and pipe chases inside walls. If any insulation terial is encountered that does not ap~ear in this report, t resembles ACM, that particular mater1al should be aluated either by visual or if necessary, analytical means to termine that it aoes or does not contain asbestos. COK'l'DJ ASBESTOS RBPORT PAGB 2