Laserfiche WebLink
<br />A. A maximum combined accessory building total size of 1,299 square feet <br />(proposed 30 feet wide by 28 feet deep or 840 square feet and existing 25.5 feet <br />by 18 feet or 459 square feet). <br /> <br />B. The elimination of the allowance of a 120 square foot garden shed (allowed under <br />Section 1004.01A2) <br /> <br />C. A maximum impervious surface coverage for the parcel of 30% or 11,476 square <br />feet. <br /> <br />D. The new garage being located in the general location of the existing (to be razed) <br />accessory building and kept a minimum of six feet from the principal structure. <br /> <br />E. The inclusion of doors and windows as proposed on the submitted plans. <br /> <br />F. A maximum exterior wall height of nine feet and a maximum garage door height <br />of eight feet. <br /> <br />G. The installation of roof gutters to properly channel roof drainage away from the <br />adjacent (east) property. <br /> <br />H. A maximum building height of 15 feet (to the midpoint of the roof truss) and the <br />installation of roof trusses that are of a similar design to that of existing structure <br />contiguous to the property. <br /> <br />1. The submittal and approval by the Community Development Department of a <br />screening plan that incorporates coniferous and deciduous landscaping and along <br />the sides of the new building/site. <br /> <br />1. The accessory structure being constructed of a similar color and with similar <br />materials to that of the principal structure. <br /> <br />K. The use of the detached accessory buildings (garage) being limited to residential <br />storage and use only. <br /> <br />L. The existing detached garage being razed prior to the issuance of the building <br />permit to start construction of the new accessory structure. <br /> <br />M. The conditional use permit expires 6 months after approval if a building permit <br />has not been issued (Section 1013.03). <br /> <br /> <br />PF3397 ReA 061702 Page 6 of? <br />