My WebLink
|
Help
|
About
|
Sign Out
Home
pf_03474
Roseville
>
Planning Files
>
Old Numbering System (pre-2007)
>
PF3000 - PF3801
>
3400
>
pf_03474
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
7/17/2007 2:14:18 PM
Creation date
7/1/2005 9:04:29 AM
Metadata
Fields
Template:
Planning Files
Planning Files - Planning File #
3474
Planning Files - Type
Miscellaneous
Status
Approved
Additional Information
BUILDING CODE ORD
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
129
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
<br />2. Minimum Distance: The minimum distance between edges of driveways at the <br />property line right-of-way line shall be ten feet (10') except in planned unit <br />developments where the development agreement shall specify the distance. <br />(703.04B2) <br />3. Parking Lot Aisle: Any drive aisle in a parking lot in any residential zoning <br />district serving a building containing three (3) or more dwelling units or in <br />any zone other than a residential zoning district shall be a minimum of twenty <br />four feet (24') except one-way drive aisles which shall be a minimum of <br />eighteen feet (18'). (703.04B3) <br /> <br />4. Intersection: On properties zoned R-l or R-2, no driveway shall be located <br />within thirty feet (30') of any right of way of a street intersection. On <br />properties in all other zones, no driveway shall be located within forty feet <br />(40') of any right-of-way line of a street intersection. Said distances shall be <br />measured along the property line from the comer right-of-way line. (703.04B4) <br /> <br />5. Minimum Driveway Angle: The minimum driveway angle from a two-way <br />access street shall be sixty degrees (600), from a one-way street it shall be <br />thirty degrees (300). (703.04B5) <br /> <br />6. Driveway Approaches: Driveway approaches between the curb and the <br />property line shall be constructed of concrete, asphalt, brick pavers at a <br />strength capable of handling the weight of cars and trucks (generally stamped <br />on bottom of paver) or other hard surface pavement approved by the Public <br />Works Director. (703.04B6) <br /> <br />If concrete is used for the driveway, where there is no concrete curb or gutter, <br />the concrete driveway shall be held back two feet (2') from the edge of the <br />roadway. The remaining two feet (2') shall be surfaced with hot mixed <br />bituminous material. Prior to starting work, the owner or builder shall obtain a <br />permit from the Community Development Director or designee. (703.04B6) <br /> <br />7. Driveways: Driveways shall be constructed of concrete, asphalt, brick pavers <br />or other hard surface pavement approved by the Public Works Director. In all <br />zoning districts except R-l and R-2, the periphery of parking areas and drives <br />shall be constructed with poured in place concrete curbing. (703.04B7) <br /> <br />8. Driveway Elevation: The driveway elevation at the property or right-of-way <br />line shall not be more than ten inches (lO") nor less than four inches (4") <br />above the center line of the abutting street with a maximum slope to gutter <br />lines of 10%+ and a minimum slope of2%+. (703.04B8) <br /> <br />9. Driveways On Private Property: Residential driveways, shall be constructed <br />so that the edge of the driveway nearest to the side lot line shall be a minimum <br />of five feet (5') from the side lot line. (703.04B9) <br /> <br />6 <br />
The URL can be used to link to this page
Your browser does not support the video tag.