Laserfiche WebLink
<br />compatible through controls and high quality standards, to facilitate more intensive, larger, and higher <br />valued development and redevelopment areas for the regional market. This district allows opportunities <br />to integrate high quality offices, hotels, restaurants, retail uses and selected office and manufacturing <br />uses visible from state or county roads. The B-4 Retail Office Service District is intended for certain <br />areas designated as B Business area in the Comprehensive Plan!. <br /> <br />A. Permitted, Accessory, and Conditional Uses: See Section 1005.015. <br /> <br />B. Minimum Requirements: See Section 1005.01. The following minimum requirements shall also <br />apply in all B-4 Districts: <br />1. Building Height; Floor Area Ratio: No limit shall be placed on the height of buildings in the B-4 <br />District, nor shall any minimum floor area ratio be required. However, buildings over forty feet <br />(40') in height shall have front lots not less than three-fourths (3/4) of the height of the building <br />and side and rear yard setbacks of not less than one-half(1I2) ofthe height of the building. <br />2. Outdoor Storage: There shall be no outdoor storage of equipment, materials, or products. <br /> <br />1005.07: B-6 MIXED USE BUSINESS PARK DISTRICTS: <br /> <br />The B-6 Office Park District is designed to provide a high quality office, clinic, hotel, and research <br />complex with multiple stories. Because the intent is to create tall and dense office towers, there is no <br />height limit in this district. This district is normally located adjacent to and is visible from state or <br />county roads. The B-6 Office Park District is intended for selected areas designated as B Business area <br />within the Comprehensive Plan. <br /> <br />A. A mixed use business park land use designation is defined as a geographically identifiable area <br />containing a consistent architectural mix of office, office-laboratory, office-showroom- <br />warehousing, biotechnical, biomedical, high-tech software and hardware production uses with <br />support services such as limited retail, health, fitness, lodging and multifamily housing. A "Mixed <br />Use Business Park" is a redevelopment area, in which the environmental impacts of business park <br />have been analyzed through an environmental impact statement or similar. The impacts are then <br />mitigated within the requirements a Planned Unit Development as defined in Section 1008. All <br />parcels shall have well-planned roads, utilities, ponding and communication systems. Parcels <br />within a "Mixed Use Business Park" shall have access to an internal parkway and/or external <br />County roads as well as convenient access to the Interstate Highway System. Emphasis shall be <br />placed on creating a unique, safe and high-quality work and play environment by installation of <br />extraordinary, architecturally distinct buildings, parkways, transit and transportation services, site <br />planning, landscaping, parks, pedestrian pathways, and lighting. <br /> <br />B. A B-6 district may be established after completion and city approval of a mixed-use master plan <br />for the entire district and completion of any required or voluntary environmental review such as an <br />Environmental Impact Statement (EIS) or Alternate Urban Area Review (AUAR) as defined by <br />the Minnesota Environmental Quality Board rules. Uses permitted within a B-6 district shall <br />comply with Section 1008 of this Code by completing a Planned Unit Development prior to the <br />issuance of any building permits. The Planned Unit Development shall implement all mitigation <br />requirements ofthe EIS or AUAR as well as Business Park Design Guidelines of Section 1010 <br />and subdivision requirements of Chapter 11 of this Code. <br /> <br />9 <br />