Laserfiche WebLink
Attachment 5 <br />2027 3. Stepbacks of upper stories; or <br />2028 4. Placement of doors, windows and balconies. <br />2029 E. Window and Door Openings: <br />2030 1. Windows, doors, or other openings shall comprise at least 60% of the length and at least 40% of <br />2031 the area of any ground floor facade fronting a public street. At least 50% of the windows shall <br />2032 have the lower sill within 3 feet of grade. <br />2033 2. Windows, doors, or other openings shall comprise at least 20% of side and rear ground floor <br />2034 facades not fronting a public street. On upper stories, windows, or balconies shall comprise at <br />2035 least 20% of the facade area. <br />2036 3. Glass on windows and doors shall be clear or slightly tinted to allow views in and out of the <br />2037 interior. Spandrel (translucent) glass may be used on service areas. <br />2038 4. Window shape, size, and patterns shall emphasize the intended organization and articulation of <br />2039 the building facade. <br />2040 5. Displays may be placed within windows. Equipment within buildings shall be placed at least 5 <br />2041 feet behind windows. <br />2042 F. Materials: All exterior wall finishes on any building must be a combination of the following <br />2043 materials: No less than 60% face brick; natural or cultured stone; pre-colored factory stained or <br />2044 stained on site textured pre-cast concrete panels; textured concrete block; stucco; glass; fiberglass or <br />2045 similar materials and no more than 40% pre-finished metal, cor-ten steel, copper, premium grade <br />2046 wood with mitered outside corners (e.g., cedar, redwood, and fir), or fiber cement board. Under no <br />2047 circumstances shall sheet metal aluminum, corrugated aluminum, asbestos, iron plain or painted, or <br />2048 plain concrete block be acceptable as an exterior wall material on buildings within the city. Other <br />2049 materials of equal quality to those listed may be approved by the Community Development <br />2050 Department. <br />2051 G. Four-sided Building Design: Building design shall provide consistent architectural treatment on all <br />2052 building walls. All sides of a building must display compatible materials, although decorative <br />2053 elements and materials may be concentrated on street- facing facades. All facades shall contain <br />2054 window openings. This standard may be waived by the Community Development Department for <br />2055 uses that include elements such as service bays on one or more facades. <br />2056 H. Special or Object-Oriented Buildings: In some cases, a uniquely designed building may be proposed <br />2057 that is considered outside of these stated Standards due to its purpose, use, design, and/or orientation <br />2058 (e.g. a memorial, special civic function, etc.). If such a building is proposed, then it may be considered <br />2059 independently of these standards and would be subject to final approval by the City Council. <br />2060 I. Maximum Building Length: Building length parallel to the primary abutting street shall not exceed <br />2061 200 feet without a visual break such as a courtyard or recessed entry, except where a more restrictive <br />2062 standard is specified for a specific district. <br />2063 J. Garage Doors and Loading Docks: Loading docks shall be located on rear or side facades and, to the <br />2064 extent feasible, garage doors should be similarly located. Garage doors of attached garages on a <br />2065 building front shall not exceed 50% of the total length of the building front. <br /> <br />