Laserfiche WebLink
<br /> <br />Private Improvements must be constructed in accordance with City details and specifications and <br />the Approved Plans (as defined in Section 1.02). All labor and work will be done and performed <br />in the best and most workerlike manner and in strict conformance with the Approved Plans. Any <br />deviation from the Approved Plans must be preapproved in writing by the City Engineer. <br /> <br />a) Private Street Construction: Street improvements include subgrade preparation, <br />gravel base, bituminous surfacing, and concrete curb and gutters. The Developer <br />is required to follow the MnDOT schedule for materials control for testing the <br />work. Developer-contracted testing shall be performed by a qualified third party. <br />The City reserves the right to additional testing as necessary to ensure proper <br />construction, at the Developer's expense. A test roll of the street subgrade shall be <br />passed prior to acceptance of the subgrade work by the City. Public Street <br />Restoration: curb cuts and street cuts shall be reconstructed to match existing street <br />typical section. Utility trenches shall be restored by the Developer per City <br />standard plate. <br /> <br />b) Private Pathways: Pathways will be constructed by Developer in front of the <br />apartment building and to connect to public pathways. <br />c) Private Sanitary Sewer. The Developer shall construct all sanitary sewer pipes <br />determined to be necessary by the City to serve the Property, including services. <br />All sanitary sewer shall be televised, at the Developer’s expense, prior to the <br />installation of the aggregate base, concrete curb and gutter, and bituminous. No <br />roadway construction shall be commenced until the City has reviewed and <br />approved the televising tapes. All televising media shall be submitted on a City- <br />approved digital format. <br /> <br />d) Private Watermain. The Developer shall construct all watermain improvements <br />determined by the City to be necessary to serve the Property, including hydrants, <br />valves and services. Any construction that would require shut-offs of existing <br />watermain shall be coordinated with City Utilities staff. <br /> <br />e) Private Storm Sewer. The Developer shall construct all storm sewer improvements, <br />including stormwater best management practices (BMPs), determined to be <br />necessary by the City to serve the Property, including the construction of inlets and <br />outlets. <br /> <br />1. Infiltration and filtration BMPs shall be protected from excess compaction <br />and sediment during construction. Pre- and post-construction percolation <br />testing is required. If these BMPs do not function as designed, the <br />Developer shall reconstruct them as directed by the City Engineer. <br />2.All storm sewer shall be televised, at the Developer’s expense, prior to the <br />installation of the aggregate base, concrete curb and gutter, and bituminous. <br />5 <br />RS160\\10\\864844.v1 <br /> <br />