pf_01547 - Laserfiche WebLink

Home

�pf`~ 23. Describe and indicate on a site map the provisions to and ;.; control erosion and stormwater run-off. Include size a location of any retention basins, and discharge point(s). The portion of the site to be the construction site is relatively flat. The area of greater slope on site will be undisturbed by construction actiies. A such,at no in additional stormwater control other Item 21 to control waste spills, will be implemented for the project. 24. Will the project generate: a. Air pollution? _ No Yes b . Dust? No X __. Yes C. Noise? No X Yes d. Odors? X _ No Yes Explain both during and after construction, identify distances to noise sensitive land uses, and quantity and type of air pollutants. a. Process air emissions will not be significant since water -based, not organic solvent-based, processing will occur at the facility. However, emissions control equipment permit may be required for the facility if venting to the outside air to occur or if a boiler is installed which Minnesota rule 7005-0200 - 7005.OZ50 requirements. Determination of the need for an air quality permit will be made after completion of the design specifications for the facility. in addition, air quality surveillance, monitoring wi.11 systems of the storage, and processing equipment be required through RCRA. b. During construction and operation of the proposed facility, the contractor 7005.0550proposer implement dust with Minnesota rule control measures as necessary to minimize airborne fugitive dust. All roads within the facility will be paved. As such, reentrained particulate due to truck traffic will be kept to a minimum. c. The proposer must conform to Toxic SubstancesCtrol Act (TSCA), RCRA, county, and citytransportation requirements and will mitigate is impacts ct by0the use of properly muffled equipment, truck traffic to avos�alimitingf such traffic to residents, where posble, 9.