Laserfiche WebLink
<br />to be permanently set. Joints may also be formed by <br /> <br />means of a cold troweling material using a preparation <br /> <br />of "ka1ktite", "sewerite", II at1astic-77" or equal. <br /> <br />Pipes, before pouring, shall be dry and clean. The <br /> <br />jointing material shall be heated until it has become <br /> <br />quite thin, thus causing it to pour freely and smoothly. <br /> <br />The compound shall be poured continuously until the <br /> <br />joint is completely filled, leaving no air bubble in <br /> <br />the solidified mass. <br /> <br />(2) The use of resilient factory- <br /> <br />fabricated jointing connection in accordance with <br /> <br />A.S.T.M. designation c-425-58T~ either type I, II, <br /> <br />or III is permissible for joints in Vitrified Clay Pipe. <br /> <br />III. <br />Section 72.190 of the Village Code is hereby <br />amended to read as follows: <br /> <br />72.190. Costs and Maintenance. <br /> <br />(1) All costs and expenses incident <br /> <br />to the installation and connection to the municipal <br /> <br />sewer system shall be borne by the owner, and the owner <br /> <br />shall indemnify the Village for any loss or damage that may, <br /> <br />directly or indirectly, be occasioned by the installation <br />