Laserfiche WebLink
<br />3 <br />Y,~'x - ~~ <br />{ <br />5 <br />7 <br />2 <br />4 <br />6 <br />8 <br />1. Once silt fence has been run over with silt, the catch basin <br />must be cleaned out and the silt fence reinstalled. <br />2. Remove lid from the catch basin, drop in the "SILTSAGK" <br />and replace the lid. Installation time is approximately 1 <br />minute. <br />3. Cover the flaps with dirt. and the installation is complete. <br />4. As the water rises it begins to cascade in from all sides. <br />5. To remove the "SILTSAGK," (1) slide 2 rebar through the <br />pockets on the long side flaps; (2) after lifting bars are in place, <br />leave in place or remove catch basin lid; (3) hook a lift sling to <br />the rebar; and (4) pick the sack up with heavy equiptment. <br />6. Removing the "SILTSAGK" takes approximately 2-5 minutes. <br />7. The unique permeability of the "SILTSAGK" fabric lets the <br />water out and keeps the silt in -notice the clean catch basin. <br />8. °SILTSAGK" contained 99.9% of the silt -nothing else can do that! <br />