CC_Minutes_2010_0726 - Laserfiche WebLink

Home

application was accepted as complete or such date as extended by the applicant or City Council. If the City Council shall disapprove said preliminary plat, the grounds for any such refusal shall be set forth in the proceedings of the City Council and reported to the person or persons applying for such approval. (Ord. 11'76, 11-25-1996) 2. Approval of the preliminary plat shall not be construed to be approval of the final plat. (1990 Code; 1995 Code) (Ord. 1296, 10-20-2003) F. Final Plat: 1. Final Plat Submission: The owner or subdivider shall submit the final plat of a proposed subdivision not later than six months after the date of approval of the preliminary plat; otherwise, the preliminary plat will be considered void unless an extension is requested in writing by the subdivider and granted by the City Council. The owner or subdivider shall also submit with the final plat an up to date certified abstract of title or registered property report and such other evidence as the City Attorney may require showing title or control in the applicant. (Ord. 1176, 11-25-1996) (Ord. 1296, 10-20-2003) (Ord. 1363, 3-24-2008) 2. Required Changes Incorporated: The final plat shall have incorporated all changes or modifications required by the City Council; in all other respects it shall conform to the preliminary plat. It may constitute only that portion of the approved preliminary plat which the subdivider proposes to record and develop at the time, provided that such portion conforms with all the requirements of this Title. (1990 Code; 1995 Code) (Ord. 1296, 10-20-2003) G. Approval and Recording:. The City Council shall act upon a final plat application within 120 days of the submission of a completed application. The refusal to approve the plat shall be set forth in the proceedings of the City Council and reported to the person or persons applying for such approval. If the final plat is approved, the subdivider shall record said plat with the County Recorder within one year after the date of approval and prior to the issuance of any building permit; otherwise, the approval of the final plat shall be considered void. (1990 Code; 1995 Code) (Ord. 1296, 10-20-, 2003) (Ord. 1363, 3-24- 2008) 1102.02: NECESSARY DATA FOR PRELIMINARY PLAT: In addition to the data prescribed by the law of the State of Minnesota, the preliminary plan shall include the following data: A. Identification and Description: 1. Proposed name of subdivision, which name shall not duplicate the name of any plat previously recorded in the County. 2. Location by township, section, town or range or by other legal description. 3. Names and addresses of the owner or subdivider having control of the lands included in said plan, the designer of the plan and the surveyor. 4. Graphic (engineering) scale not less than one (1) inch to one hundred (100) feet. 5. North point (designated as true north). 6. Date of preparation. B. Existing Conditions: 1. Boundary line of proposed subdivision clearly indicated. 2. Existing zoning classification. 3. Total approximate acreage in said plan. 4. Location, widths and names of all existing or previously platted streets or other public ways showing type of improvement, if any, railroad and utility rights of way, parks and other public open spaces, permanent buildings and structures, easements and section and corporate lines within the tract and to a distance of one hundred (100) feet beyond the tract. 5. Location and size of existing sewers, water mains, culverts or other underground facilities within the tract and to a distance of one hundred (100) feet beyond the tract. Such data as grades, invert elevations and location of catch basins, manholes and hydrants shall also be shown. 6. Boundary lines of adjoining unsubdivided or subdivided land within one hundred (100) feet,