ord_1403 - Laserfiche WebLink

Home

• and arrangement of vehicle parking,curb cuts,driveways, and walkways and to be consistent with the requirements of Chapter 703 of this Code. B. Access and Location:Parking areas shall have access to a public street.Driveways shall be located to minimize interference with traffic movement,and to be consistent with the requirements of Chapter 703 of this Code. C. Parking Spaces:Required parking spaces shall be at least 9 feet wide and 18 feet long.Up to 50%of the required spaces may be designated compact spaces.Compact spaces shall be identified through appropriate signage.Unless alternative requirements are designated by the Community Development Department and/or City Engineer,parking spaces shall be served by access drives with minimum dimensions provided as follows: Table 1019-2:Parking Lot Dimenls Curb Vehicle (degrees} Length ,Projection (feet) Traffic Flow (feet) (feet) 45 9 22 14 One way 60 9 21 16 One way • 75 9 21 18 One way 90 9 18 24 Two way 90 compact 8 16 24 Two way Parallel 23 8.5 22 D. Handicapped Parking Spaces:The size,number,and location of stalls reserved for handicapped parking shall be provided and identified as required by applicable regulations. These spaces are included in the computation for the minimum parking space requirement. E. Turnarounds: 1. All parking areas except those serving one-family and two-family dwellings on local streets shall be designed so that cars do not have to back into the public street. 2. Parking areas for one-family and two-family dwellings with driveway access onto County or State roads shall be designed so that cars do not have to back into the street. F. Surfacing:All off-street parking areas and driveways shall be constructed of bituminous asphalt,concrete,pavers,or other material approved by the City Engineer. G. Walkways: Required parking areas for 6 or more vehicles shall have walkways separated from the parking area and surfaced with bituminous asphalt,pavers,or concrete