Laserfiche WebLink
<br />City of Arden Hills <br />City Council Meeting for June 24, 2019 <br />P:\Planning\Planning Cases\2019\19-001 - Brausen - PUD, SP <br />Page 4 of 6 <br />The revised plan is shown below, and attached as Attachment D. This plan orients the carwash <br />access on the south side of the building. Stacking spaces are along the south lot line, and <br />separated from the general drive aisle by a concrete median. Vehicles will exit the wash bay of <br />the north, and have a more direct line to the access to County Road E. The trash enclosure has <br />been relocated to the southeast corner of the site to accommodate stacking spaces. <br /> <br /> <br />The revised proposal provides more stacking spaces, as well as better circulation on the site. <br /> <br />Section 1325.05, Subd. 1, F - Minimum Caliper Inches and Tree Ratio – Flexibility Requested <br />The Zoning Code requires that a minimum number of caliper inches of trees be provided based <br />on the gross square footage of the building on the property. Based on the total 18,623 square feet <br />of additions, a minimum of 58 caliper inches is required. The existing site has 171 caliper inches. <br />The Applicant is proposing to remove 131 caliper inches. The removal of 131 caliper inches <br />requires replacement at one (1) per every two (2) lost or 65.5 caliper inches. Due to the <br />reduction in green space the applicant is requesting flexibility to plant 50.4 caliper inches. The <br />Applicant is proposing to plant 10 Juniper trees onsite. The Juniper trees could count towards <br />the overall caliper inches. Typically, Junipers and Arborvitae trees are considered shrubs. The <br />Landscaping Plan was slightly revised as a result of the change in the car wash. The revised plan <br />is attached as Attachment E.