05-05-21 Planning Commission - Laserfiche WebLink

Home Browse Search

TD518264EN 11/13/2018 SPECIFICATION FEATURES DESCRIPTION The Halo Surface LED Downlight (SLD) incorporates WaveStream™ technology to create an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. SLD4 is designed for installation in many 3-1/2” and 4” round or octagon junction boxes. May also retrofit in 4” aperture IC and Non-IC recessed housings*. Dedicated LED wiring connector meets high-efficacy code requirement in recessed downlighting. Suitable for residential or commercial installations. Ideal for closets, storage areas, attics and basements. Compliant with NFPA® 70, NEC® Section 410.16 (A)(3) and 410.16 (C)(5). CONSTRUCTION • Die cast aluminum trim ring and die formed aluminum frame OPTICS • WaveStream™ technology provides uniform luminance from a low profile flat lens • AccuAim™ optics provide directional control for the “cone-of-light” beam distribution of a traditional downlight • Precision molded lens features high transmission polymer with UV stabilized protecting film DESIGNER TRIMS Accessories (sold separately) SLD designer trims are accessory rings that attach to the SLD for a permanent finish. Refer to SLD accessories specification sheet for details. • White (Paintable) • Satin Nickel • Tuscan Bronze ELECTRICAL JUNCTION BOX MOUNTING • SLD may be used in compatible electrical junction boxes in direct contact with insulation including spray foam insulation • Suitable for installation in many 3-1/2” and 4” octagon and round electrical junction boxes. Note: Driver consumes 3 cubic inches of junction box. • Installer must ensure compatibility of fit, wiring and proper mounting in the electrical junction box. This includes all applicable national and local electrical and building codes. • Proprietary Slot-N-Lock quick installation system for junction box installation • T-bracket with Slot-N-Lock mounting tabs included. RECESSED HOUSING MOUNTING Friction Blade • Pre-installed precision formed friction blades included • Friction blade design allows the SLD to be installed in any position within the housing aperture (360 degrees) * Note: Not for use in recessed housings in direct contact with spray foam insulation refer to NEMA LSD 57-2013 LED • Trilateral linear LED assembly is integrated in trim perimeter. • Color Temperature: 2700K, 3000K, 3500K, 4000K • CRI options: 80 and 90† • 90 CRI can be used to comply with California Title 24 High Efficacy requirements. Certified to California Appliance Efficiency Database under JA8 • L70 at 50,000 hours projected in accordance with TM-21 WARRANTY Eaton provides a five year limited warranty on the SLD LED LED CHROMATICITY • A tight chromaticity specification ensures LED color uniformity, sustainable Color Rendering Index (CRI) and Correlated Color Temperature (CCT) over the useful life of the LED • LED chromaticity of 3 SDCM exceeds ENERGY STAR® color standards per ANSI C78.377-2008 • 90 CRI model features high color performance with R9 greater than 50 • Every Halo LED is quality tested, measured, and serialized in a permanent record to register lumens, wattage, CRI and CCT. • Halo LED serialized testing and measurement ensures color and lumen consistency on a per-unit basis, and validates long-term product consistency over time ELECTRICAL CONNECTIONS Junction Box • Compatible with many 3-1/2” x 2” and 4” x 1-1/2” round and octagon boxes (2-1/8” deep boxes recommended) • Supply Wire Adapter with LED quick connector included Recessed Housings • LED connector is compatible with Halo 4” H995 and H245 Series LED Housings • LED Connector meets California Title-24 high-efficacy luminaire standard as a non-screw base • The included E26 Edison screw-base adapter provides capability for retrofit* • LED connector is a non-screwbase luminaire disconnect for tool-less installation LED DRIVER • Driver is a 120V input high efficiency, dimmable electronic power supply providing DC power to the LED array • Driver features high power factor, low THD, and has integral thermal protection in the event of over temperature or internal failure. • Driver is replaceable if it should be required SLD4058xxWH 80CRI 2700K, 3000K, 3500K, and 4000K SLD4059xxWH 90CRI 2700K, 3000K, 3500K, and 4000K 4” Surface LED Downlight Suitable for ceiling or wall electrical junction boxes Suitable for 4” recessed housing retrofit (IC, Non-IC & AIR-TITE™) ENERGY DATA 80 CRI 90 CRI Lumens (4000K models)800 710 Input Voltage 120V 120V Frequency 50/60 Hz 50/60 Hz Input Current 0.10 A 0.10 A Input Power 12.2 W 12 W Efficiency (4000K models)66 lm/W 59 lm/W THD ≤ 20% Power Factor ≥ 0.90 T Ambient -30 - +40°C Sound Rating Class A NOMENCLATURE SLD405830WH 405 = 4” SLD 8 = >80 CRI 30 = 3000K WH = Matte White Refer to ENERGY STAR® Certified Products List. Refer to ENERGY STAR® Qualified Products List. Can be used to comply with California Title 24 High Efficacy requirements. Certified to California Appliance Efficiency Database under JA8. Indoor LED nominal CCT of 4000K or less. *Non-California Product Only Catalog # Project Comments Prepared by Type Date HALO Z1