Laserfiche WebLink
SLD4058xxWH <br />SLD4059xxWH <br />ORDERING INFORMATION <br />SAMPLE NUMBER: SLD405927WH SLD4TRMSN <br />Junction Box Installation: Order junction box separately, as supplied by others, to complete installation. <br />Recessed Installation: Order Halo recessed housing separately to complete installation. <br />Models Color Rendering Index Color Temperature (CCT) Finish Accessories <br />SLD405= 4” Surface LED Downlight, 120V <br />California non-E26 Models <br />SLD405927WH-CA <br />SLD405930WH-CA <br />SSLD405935WH-CA <br />SSLD405940WH-CA <br />8=80 CRI <br />9=90 CRI <br />27=2700K <br />30=3000K <br />35=3500K <br />40=4000K <br />WH=White Designer Trims <br />Fit over the SLD4 for a designer finish <br />SLD4TRMSN=4” SLD Satin Nickel <br />SLD4TRMTBZ=4” SLD Tuscan Bronze <br />SLD4TRMWH=4” SLD White (paintable) <br />J-Box Spacer Extension Ring <br />Add 15/16” depth when SLD driver cannot fit into installed <br />junction box <br />SLD4EXT=4” Surface LED J-Box Extender, 7.75” O.D. <br />RAD Adapters <br />When junction box is mounted flat on a ceiling or beam <br />surface (not recessed in ceiling) <br />SLD4RAD=4” SLD Round Surface J-Box Adapter, <br />6.15” O.D. (For 4-inch round or octagon junction boxes) <br />Spare Parts <br />SLD4ACCKIT=4” Accessory Parts Replacement Kit <br />(Screwbase adapter, torsion springs, friction blades) <br />SLD4BRKT=4” Junction Box Bracket & Screws <br />Refer to SLD Accessories specification sheet for further <br />information. <br />DIMENSIONS <br />SLD4058xxWH <br />80CRI <br />2700K, 3000K, 3500K, <br />and 4000K <br />SLD4059xxWH <br />90CRI <br />2700K, 3000K, 3500K, <br />and 4000K <br />4” Surface LED <br />Downlight <br />Suitable for <br />ceiling or wall <br />electrical junction boxes <br />Suitable for <br />4” recessed <br />housing retrofit <br />(IC, Non-IC & AIR-TITE™) <br />DIMMING <br />• Designed for continuous dimming <br />capability to nominally 5% with <br />many 120V Leading Edge (LE) <br />and Trailing Edge (TE) phase <br />control dimmers. Dimming to 5% <br />is best assured using dimmers <br />with low end trim adjustment. <br />Consult dimmer manufacturer for <br />compatibility and conditions of <br />use. (Note some dimmers require <br />a neutral in the wallbox.) <br />COMPLIANCE <br />• cULus Listed ceiling and wall <br />• cULus Damp Location listed <br />ceiling and wall <br />• cULus Wet Location Listed, ceiling <br />only (shower rated) <br />• Suitable for use in closets, <br />compliant with NFPA® 70, NEC® <br />Section 410.16 (A)(3) and 410.16 <br />(C)(5) <br />• SLD may be used in compatible <br />electrical junction boxes in direct <br />contact with insulation including <br />spray foam insulation <br />• May be installed in IC recessed <br />housings in direct contact with <br />insulation (Not for use in recessed <br />housings in direct contact with <br />spray foam insulation. Refer to <br />NEMA LSD 57-2013) <br />• UL Classified when used in <br />retrofit with listed housings <br />(See Housing Compatibility) <br />• EMI/RFI: meets FCC 47CFR Part 15 <br />Class B limits, and is suitable for <br />use in residential and commercial <br />installations <br />• Airtight certified per ASTM E283 <br />(not exceeding 2.0 CFM under 57 <br />Pascals pressure difference) <br />• 90 CRI: Can be used to comply <br />with California Title 24 High <br />Efficacy requirements. <br />• 80 CRI: Can be used to comply <br />with California Title 24 Non- <br />Residential Lighting Controls <br />requirements as a LED luminaire. <br />• Can be used for International <br />Energy Conservation Code (IECC) <br />• ENERGY STAR® Certified <br />luminaire - consult ENERGY <br />STAR® Certified Product List <br />• Contains no mercury or lead and <br />RoHS compliant. <br />• Photometric testing in accordance <br />with IES LM-79 <br />• Lumen maintenance projections <br />in accordance with IES LM-80 and <br />TM-21 <br />6” <br />[152mm] <br />.7” <br />[17.42mm] <br />.8” <br />[20.20mm] <br />6” <br />[152.65mm] <br />page 2