Laserfiche WebLink
SLD4058xxWH <br />SLD4059xxWH <br />HOUSING COMPATIBILITY <br />The SLD4 is UL Listed in Halo recessed housings, and is UL Classified for use with any 4 inch diameter recessed housing constructed of steel or aluminum with an internal volume <br />that exceeds 62.3 in³ in addition to those noted below: <br />*This is a representative list of compatible junction boxes only. Information contained in this literature about other manufacturers’ products is <br />from published information made available by the manufacturer and is deemed to be reliable, but has not been verified. Eaton makes no specific <br />recommendation on product selection and there are no warranties of performance or compatibility implied. Installer must determine that site conditions <br />are suitable to allow proper installation of the SLD mounting bracket in the box. <br />COMPATIBLE WITH MANY OTHER JUNCTION BOXES* <br />COMPATIBLE WITH EATON’S CROUSE-HINDS JUNCTION BOXES <br />4" octagon light fixture/fan <br />steel box <br />4" x 4" x 2-1/8" <br />(102mm x 102mm x 54mm) <br />4" round new work non-metallic <br />light fixture/fan box <br />4" diameter x 2-3/16" <br />(102mm x 56mm) <br />• TP316 - for non-metallic cable <br />• TP317 - for metal clad cable <br />• UL Listed <br />• Refer to www.crouse-hinds.com <br />TP316 <br />for non-metallic cable <br />4” x 4” x 2-1/8” <br />(102mm x 102mm x 54mm) <br />TP317 <br />for metal clad cable <br />4” x 4” x 2-1/8” <br />(102mm x 102mm x 54mm) <br />4" round new work non-metallic box <br />with hanger bar assembly <br />4" diameter x 2-3/16" (102mm x 56mm) <br />3-1/2" round old work non-metallic box <br />4-1/4" O.D. flange, 3-1/2" I.D. x 2-5/8” <br />(108mm O.D., 89mm I.D. x 67mm) <br />4" octagon steel box <br />4" x 4" x 1-1/2" <br />(102mm x 102mm x 38mm) <br />3-1/2" round new work <br />non-metallic ceiling box <br />3-1/2" diameter x 2-3/4" <br />(89mm x 70mm) <br />Compatible Halo LED Housings with LED luminaire connector (high-efficacy compliant) <br />HALO <br />LED <br />Recessed Can Size Catalog Number <br />4"H995ICAT, H995RICAT, H245ICAT, H245RICAT <br />Compatible Halo Incandescent E26 Screwbase Housings <br />HALO Recessed Can Size Catalog Number <br />4"H99ICAT, H99TAT, H99RTAT, E4ICATSB, E4TATSB, E4RTATSB <br />4” round surface mount box <br />4" diameter x 1-1/2” <br />(102mm x 38mm) <br />Requires SLD4RAD adapter <br />page 3